Will this controller work?

NOLA26 · 08-10-2022, 01:23 PM

I have a Club Car Precedent. The motor has been at Plumquick Racing for about two weeks and I'm excited to get it back. While I'm waiting, I am doing some other improvements, like painting the cart, dyeing the seats, etc. I have a EzGO TXT cart at work that is getting an AC conversion installed. I was wondering if the controller in the EZGO will work on my Club Car? The controller is an Alltrax. On the controller label it says:

Nivel 490

ALLTRAX DCX400PDS w/adpt, ITS

I figured if it is compatible, it would be a nice upgrade to go from the stock 325 amp controller to a 400 amp controller.

scottyb · 08-10-2022, 01:33 PM

I don't think it will.

kgsc · 08-10-2022, 01:44 PM

If you can find the adapter for the DCX it should but it will require programming.

scottyb · 08-10-2022, 01:48 PM

Quote:

Originally Posted by kgsc

If you can find the adapter for the DCX it should.

Yeah but the PDS is a nine pin and the IQ uses 13 pins. I'm thinking some functions as simple as solenoid activation could be on different pins due to the different arrangements. Perhaps Alltrax could flash it to work but maybe not since it is so far removed from their current production run.
I have the DCS IQ adapter if you want to try. Better yet call Alltrax first and don't tell them I sent you

kgsc · 08-10-2022, 01:57 PM

Alltrax has this flyer on their documents site.
https://alltraxinc.com/wp-content/up...rd-Install.pdf

08-10-2022, 01:23 PM	#1
NOLA26 Not Yet Wild Join Date: Oct 2018 Posts: 56	Will this controller work? I have a Club Car Precedent. The motor has been at Plumquick Racing for about two weeks and I'm excited to get it back. While I'm waiting, I am doing some other improvements, like painting the cart, dyeing the seats, etc. I have a EzGO TXT cart at work that is getting an AC conversion installed. I was wondering if the controller in the EZGO will work on my Club Car? The controller is an Alltrax. On the controller label it says: Nivel 490 ALLTRAX DCX400PDS w/adpt, ITS I figured if it is compatible, it would be a nice upgrade to go from the stock 325 amp controller to a 400 amp controller.
NOLA26 Not Yet Wild Join Date: Oct 2018 Posts: 56

08-10-2022, 01:33 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: Will this controller work? I don't think it will.

08-10-2022, 01:44 PM	#3
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,140	Re: Will this controller work? If you can find the adapter for the DCX it should but it will require programming.

08-10-2022, 01:57 PM	#5
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,140	Re: Will this controller work? Alltrax has this flyer on their documents site. https://alltraxinc.com/wp-content/up...rd-Install.pdf

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Will this motor controller work for my 36v ezgo?	Electric EZGO
will this controller work?	Electric EZGO
Will this controller work for 36v to 48v conversion	Electric Club Car
Controller that will work with 36v for future 48-72v upgrade.	Extreme DC!
Will my '02 controller work in a '96 DCS	Electric EZGO