4awg wires now its slower

agrinnell2009 · 07-07-2013, 02:18 PM

I can't figure out why it hesitates when I hit the gas. I checked all the wire and its all where it should be and in good condition. But when I hit the has it takes a second to respond and once I'm about 3/4 throttle if I give it gas there nothing more. And its very slow notcrawling but slower than it should be

roady89 · 07-07-2013, 03:24 PM

It sounds wired incorrectly.....OR when you replaced the motor cables did you twist one of the terminals inside the motor housing? (I'm assumung you replaced those. I dont know)

agrinnell2009 · 07-07-2013, 04:04 PM

That's what I was thinking how could I tell if I twisted one of those I don't specifically remember doing that but its very possible

roady89 · 07-07-2013, 04:08 PM

You'll need a Volt/ohm meter to check each terminal to see if it has continuity to case.......(Or to another lug its not supposed to have continuity)other than that the only way I know is to pull the motor off.

Its entirely possible when you removed the cables from the motor one got turned and is shorting out.

agrinnell2009 · 07-07-2013, 04:20 PM

How would ie tell if I so pull the motor what should I look for

07-07-2013, 02:18 PM	#31
agrinnell2009 Not Yet Wild Join Date: Jun 2013 Posts: 32	Re: 4awg wires now its slower I can't figure out why it hesitates when I hit the gas. I checked all the wire and its all where it should be and in good condition. But when I hit the has it takes a second to respond and once I'm about 3/4 throttle if I give it gas there nothing more. And its very slow notcrawling but slower than it should be
agrinnell2009 Not Yet Wild Join Date: Jun 2013 Posts: 32

07-07-2013, 03:24 PM	#32
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: 4awg wires now its slower It sounds wired incorrectly.....OR when you replaced the motor cables did you twist one of the terminals inside the motor housing? (I'm assumung you replaced those. I dont know)
roady89 nimda Join Date: Jun 2007 Posts: 13,022

07-07-2013, 04:04 PM	#33
agrinnell2009 Not Yet Wild Join Date: Jun 2013 Posts: 32	Re: 4awg wires now its slower That's what I was thinking how could I tell if I twisted one of those I don't specifically remember doing that but its very possible
agrinnell2009 Not Yet Wild Join Date: Jun 2013 Posts: 32

07-07-2013, 04:08 PM	#34
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: 4awg wires now its slower You'll need a Volt/ohm meter to check each terminal to see if it has continuity to case.......(Or to another lug its not supposed to have continuity)other than that the only way I know is to pull the motor off. Its entirely possible when you removed the cables from the motor one got turned and is shorting out.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

07-07-2013, 04:20 PM	#35
agrinnell2009 Not Yet Wild Join Date: Jun 2013 Posts: 32	Re: 4awg wires now its slower How would ie tell if I so pull the motor what should I look for
agrinnell2009 Not Yet Wild Join Date: Jun 2013 Posts: 32

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Club Car OBC, w/Upgraded 4awg Cable	Golf Carts and Parts
going slower	Electric Club Car
It's Slower	Electric EZGO
wana go slower	Gas Yamaha
Still Slower Than The Neighbor	Extreme DC!