I have a few issues with a jakes lift kit that I need help on

[Kal]

Originally Posted by Jd62

Haha !! We all do some error , i was plugging underbody light kit on my 36 volt txt.the kit was ratted for 6 volt, but i plug it on 36 volt"..... The controller do some smoked and it was done for the underbody led ....

I thought light kits were 12v?


I got most of the stuff back together, what a pain in the rear. The control arm risers didn't fit well on the passengers side and on the drivers side we had issues with getting the hub back onto the new spindle. It hung up and while trying to pull it back off it popped out the seal and now I need to replace that now. If anytime was a beer moment this would be it.

[Jd62]

Ahaha i tell the one i buy was 6 volt hey you are very not lucky with lift kit........

Question do you know how to had picture on the forum.. I use and ipad.

[Kal]

You can use something like photobucket or I believe there is a tab on the top of the type box where you can upload pictures right to the site off a computer or device. I've only done it once myself because I had to upload some pics off my phone.

[Jd62]

Perfect, thank you i will try photobucket.