2013 RXV changed factory light switch, now no turn signal lights

[ctbluml]

Hello All,
I recently changed the factory headlight switch(10 pin) out to a single rocker switch, one headlight and one driving lights. When I did this the old switch had two red/ white power wires, I split those to one wire to each of my new switches. The old switch had a blue wire and a blue/ white wire, which I put them together on the headlight switch, so when the switch is on it powers both blue and blue/ white wire. The driving light switch I ran new wires to them. NOW, I don't have turn signal light...what did I mess up? Thanks for all your help. I will take a few pictures to let you know what I did.

Sorry, the cart is a 2012

[ctbluml]

The new switches are single pole I think, just on and off.

[ctbluml]

Am I looking at the right wiring diagram? I don't have turn signal switch, just the marker lights, which I think would be your turn signal lights if I had the switch. Here is the wiring diagram that I'm using with the modifications I made. As you can tell...pretty new to this.