still stuck on throttle type for STAR cart

[Zachary25]

okay Im still stuck, Im not sure what throttle they use on a STAR cart 48 volt I know its a potentiometer anyone have more info on this? I need a controller, the one that was in the cart was a curtis 1268-5403, I see madjax has a controller that uses the 1268 style plug

http://www.evdrives.com/product_p/con-25-001-ez.htm

[Zachary25]

okay, I found out what controller will work with a STAR cart its a 600 amp XD

[Zachary25]

Okay so sense no one seems to know anything, I found out the throttle type, AND a replacement controller 600amp

[zoner]

Originally Posted by Zachary25

Okay so no one seems to know anything,

You own a Chinese-made cart and most of the knowledgeable members on here are too good to help you even though every third thread on this site references an electrical issue with one of the BIG THREE.

It is a shame too because most of the components of these Chinese-made carts are the same as what is in your American-made carts.

[kgsc]

Originally Posted by zoner

You own a Chinese-made cart and most of the knowledgeable members on here are too good to help you even though every third thread on this site references an electrical issue with one of the BIG THREE.

It is a shame too because most of the components of these Chinese-made carts are the same as what is in your American-made carts.

Hmmm. Wow. Problem with the Chinese carts is that almost every shipment that came to a dealer was built with different parts than the last. Makes trouble shooting a nightmare. If it had a potentiometer throttle it was probably a 0-5k or 5k-0.. VOM would tell that. Which exact controller would work is also a guess without knowing all the details in one thread and even then without seeing it in person I wouldn't recommend someone to go buy a $400 controller.

Good luck.

[Zachary25]

Well i found a company that makes controllers that will work with the STAR got a 600amp with the on the fly programmer

[kgsc]

Excellent. Is it a plug and play or will a harness have to be made?

[Zachary25]

It is plug and play navitas makes it, Its a 600amp with a on the fly programmer and you choose the harness you need for your type of stock controller, in my case it needed a Curtis 1268 conversion harness, It can be ordered from buggies unlimited. Now im kinda stuck on wiring up the new solenoid I bought from carts unlimited

[kgsc]

Solenoid should be straight forward. 2 large posts and 2 small. Just wire it the same as the one removed.

[Zachary25]

The one I'm putting in is scottyb's mzj400 just not to sure of the two small wires ones yellow other is black/white which is negative and which is positive