|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
|
Thread Tools | Display Modes |
06-13-2022, 07:42 PM
|
#1 |
|
Gone Wild
 Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,355
|
RXV Curtis Controller won't move
I need some help from some of you RXV guys! I don't work on many of these yet. I'm not sure if the year, but it is a Curtis controller. When I turn the key to reverse or forward, it will power up and jump, but that's it. I had to remove the motor brake to load it up. I was thinking a bad motor brake? Still will not move with the brake removed, but still connected. Where should I start?
Sent from my SM-G991U using Tapatalk |
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 36 volt ez go/ curtis controller wont move | Electric EZGO | |||
| 1999 TXT DCS w/Curtis controller will not move after being towed in run mode | Electric EZGO | |||
| Can i change out curtis controller 1264-5407 to a curtis 1510A-5251 by repin the con | Electric EZGO | |||
| Stock curtis 300amp controller to Alltrax SR controller for a 94 club car ds | Electric Club Car | |||
| Is the Curtis 1311-1101 Controller Handset PMC a good controller | Electric EZGO | |||
Threaded Mode