![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: Jun 2022
Posts: 1
|
![]() I'm attempting to install a DC converter to take the 48v output of the lithium battery down to 12v to connect some accessories. Ideally, the converter needs to tap onto a wire that is 'hot' only when the key is in the 'on' position. Unfortunately, the wires connected directly to the key switch carry only a 5v signal & the converter needs the full voltage to activate. These carts are so new, that there's not much information out there on 'em yet. Anyone have any ideas where I might find such a connection?
|
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Stinger PRO 4GA high voltage high current wire | Golf Carts and Parts | |||
2022 Lithium Yamaha - Noise in Transmission | Electric Yamaha | |||
2022 Drive 2 - Can't locate switched 48V | Electric Yamaha | |||
High voltage lithium | Tomberlin | |||
Is there any location other than the key switch to get a switched wire? | Electric Club Car |