|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-04-2018, 11:27 AM | #1 |
Not Yet Wild
Join Date: Dec 2017
Posts: 7
|
Plastic Pieces Floating in Battery Cell Remove or Leave
I just noticed that there is a small piece 1/8” x 1/2” piece of plastic floating in one battery cell. Should I leave it or try remove it. If I remove it how will I get it out safely? Using Trojan Hydrolink fill system and wondering if the piece will float up to the Hydrolink float and not allow it to close?
Jim |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-04-2018, 09:06 PM | #2 |
Gone Wild
Join Date: May 2015
Location: Houston
Posts: 903
|
Re: Plastic Pieces Floating in Battery Cell Remove or Leave
Use some tweezers or needle nose plyers. There should be no plastic in your batteries.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
8 volt battery Cell to Cell | Electric Club Car | |||
Dead Cell in battery | Electric Club Car | |||
Battery Cell Voltage Test???? | Electric Club Car | |||
Dead Battery Cell - Jerky when starting | Electric Club Car | |||
How well does a deep cell battery work for acc's | Electric EZGO |