![]() |
|
Electric Club Car Electric DS, and Precedent golf cars |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
![]() Join Date: Dec 2020
Posts: 2
|
![]() I have a 94 club car ds with a stock curtis 300amp controller. I recently purchased a alltrax sr 500 amp controller and need help wiring it. I'm pretty sure about how to wires to the B+ B- and M- I just need some help with the other six smaller wires. three are connected to "1" "2" and "3" and the other few are coming from the on board computer and look to be connected to B-. if someone knows where or how to wire the alltrax I would greatly appreciate it. I do have the appropriate solenoid installed and have a larger motor coming as well. I have pictures of the current controller installed if that would help.
Last edited by tdc0z10; 12-05-2020 at 09:03 PM.. Reason: misspelling |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
99 Club Car DS Curtis PB-6 to Alltrax Controller | Electric Club Car | |||
36v stock Curtis pds controller | Golf Carts and Parts | |||
95 Club Car 48 volt with stock curtis controller | Electric Club Car | |||
04 Club Car Stock Curtis Controller and Motor | Golf Carts and Parts | |||
Stock Curtis Controller | Golf Carts and Parts |