![]() |
![]() |
#1 |
Not Yet Wild
Join Date: Sep 2010
Posts: 5
|
![]() i just rebuilt a txt6 gas...problem i have is that looking at the passenger side of the engine ( fan side ) on the side of the block lower ( next to the front mount , there is a banjo fitting with a 5/16 nipple....when i crank it , its dumping oil out. i realize there needs to be a hose on it but where does it go ? i have looked all over and cant find a corresponding nipple anywhere....any ideas ? I figured you guys would have the answer....Thanks....JD
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Not Yet Wild
![]() Join Date: Nov 2010
Location: Gordon GA
Posts: 37
|
![]() I see that on the carts I service from time to time and it goes to the bottom on the crank case vent valve assembly(sticks out the bottom) The vent hose that comes up to the air filter box also comes off of the same valve assy.It will have a thick adapter there with the nipple sticking out the bottom going down to the nipple in your photo>
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Oil Leak 99 club car | Gas Club Car | |||
gas leak | Gas Club Car | |||
Ez Go 4 cyl oil leak | Gas EZGO | |||
G1 oil leak | Gas Yamaha | |||
oil leak | Gas Yamaha |