Drive Belt

NO NO NO E-Z-GO! · 03-11-2007, 09:48 AM

I pose a conundrum to you all, a riddle if you will.

OK, The proper drive belt size for my cart is 1" wide by 37 3/8" inches long. Now, my question (I'm just looking for thoughts and input now so I can weigh each side) is this: Why couldn't I use a slightly wider belt (helps performance) and one about 1" longer (it's a hair too tight now)?

Here are a few specs of other belts:
Club Car 1984-87 -- 15/16 x 37 1/4 (probably too narrow)
Club Car 1988-91 -- 1 x 37 1/2 (it has all of 1/8" more length)
Yamaha G-2-UP -- 1 3/16 x 39 (possibly too wide, but length is good)

Ideas? Thoughts? Comments? NO BS!

4x4 CC · 03-11-2007, 12:47 PM

Ok, the 1 3/16 belt wont work unless you want to run the belt on top of the driven clutch... ANd the 15/16 one will suck. I say buy a new 94c clutch and send urs to TOm for it to be machined for a 1 3/6 Belt. Total it shouldn't be over 300 bucks. Plus, there are alot more belt choices.

03-11-2007, 12:50 PM

Is this a stock setup....if not we need to move it to Big Block Talk.

NO NO NO E-Z-GO! · 03-11-2007, 01:02 PM

This is a stock setup, clutching anyway! Austin, I went to a LOT of trouble to make my stock Club Car clutch work, for the whole purpose of I did NOT want a Comet clutch. I have to keep the Club Car one for the pedal start. I knew the 15/16" would not work, but the length was right. But I got what I was looking for--opinions. Does anyone have an idea other than these?

mainer · 06-05-2010, 05:19 PM

i have a 1990 cc ds does anyone know where i can get a good belt. the belt size is 1x37.50

mainer · 06-05-2010, 05:28 PM

well i am waiting for a reply on the belt i will pose another ? i have a 1992 cc and the motor is shot so i was told by the owner now i am looking to hotrod this one but would like to keep stock all but the motor this is a gas modal what size motor would you cart guys go with or type looking for speed as well as power going to be a winter thing to do here in maine

crash12888 · 06-07-2010, 07:56 AM

This original post is over three years old, might want to start your own thread for some fresh looks.

scottyb · 06-07-2010, 08:03 AM

Bwaahaaa

He hijacks a thread that is over 3 yrs dormant......

Flintrock · 06-07-2010, 09:54 AM

Quote:

Originally Posted by scottyb

Bwaahaaa

He hijacks a thread that is over 3 yrs dormant......

I thought No No waass back......

crash12888 · 06-07-2010, 05:20 PM

me too!

03-11-2007, 09:48 AM	#1
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 4,995	Drive Belt I pose a conundrum to you all, a riddle if you will. OK, The proper drive belt size for my cart is 1" wide by 37 3/8" inches long. Now, my question (I'm just looking for thoughts and input now so I can weigh each side) is this: Why couldn't I use a slightly wider belt (helps performance) and one about 1" longer (it's a hair too tight now)? Here are a few specs of other belts: Club Car 1984-87 -- 15/16 x 37 1/4 (probably too narrow) Club Car 1988-91 -- 1 x 37 1/2 (it has all of 1/8" more length) Yamaha G-2-UP -- 1 3/16 x 39 (possibly too wide, but length is good) Ideas? Thoughts? Comments? NO BS!

03-11-2007, 12:50 PM	#3
roady89 Guest Posts: n/a	Is this a stock setup....if not we need to move it to Big Block Talk.
roady89 Guest Posts: n/a

06-05-2010, 05:19 PM	#5
mainer Not Yet Wild Join Date: Feb 2010 Posts: 4	Re: Drive Belt i have a 1990 cc ds does anyone know where i can get a good belt. the belt size is 1x37.50
mainer Not Yet Wild Join Date: Feb 2010 Posts: 4

06-05-2010, 05:28 PM	#6
mainer Not Yet Wild Join Date: Feb 2010 Posts: 4	Re: Drive Belt well i am waiting for a reply on the belt i will pose another ? i have a 1992 cc and the motor is shot so i was told by the owner now i am looking to hotrod this one but would like to keep stock all but the motor this is a gas modal what size motor would you cart guys go with or type looking for speed as well as power going to be a winter thing to do here in maine
mainer Not Yet Wild Join Date: Feb 2010 Posts: 4

06-07-2010, 07:56 AM	#7
crash12888 Gone Crazy Join Date: Jan 2007 Location: Chesterfield, Va Posts: 6,021	Re: Drive Belt This original post is over three years old, might want to start your own thread for some fresh looks.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-11-2007, 12:47 PM	#2
4x4 CC Frog Hunter Join Date: Dec 2006 Location: Little Rock, Ar Posts: 1,161	Ok, the 1 3/16 belt wont work unless you want to run the belt on top of the driven clutch... ANd the 15/16 one will suck. I say buy a new 94c clutch and send urs to TOm for it to be machined for a 1 3/6 Belt. Total it shouldn't be over 300 bucks. Plus, there are alot more belt choices.

03-11-2007, 01:02 PM	#4
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 4,995	This is a stock setup, clutching anyway! Austin, I went to a LOT of trouble to make my stock Club Car clutch work, for the whole purpose of I did NOT want a Comet clutch. I have to keep the Club Car one for the pedal start. I knew the 15/16" would not work, but the length was right. But I got what I was looking for--opinions. Does anyone have an idea other than these?

06-07-2010, 08:03 AM	#8
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 72,505	Re: Drive Belt Bwaahaaa He hijacks a thread that is over 3 yrs dormant......

06-07-2010, 05:20 PM	#10
crash12888 Gone Crazy Join Date: Jan 2007 Location: Chesterfield, Va Posts: 6,021	Re: Drive Belt me too!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode