|
02-04-2013, 09:27 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2011
Posts: 40
|
Speed magnet
05 club car with GE motor. The speed sensor is a clip in. Do they make a magnet for that??
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-05-2013, 07:57 PM
|
#2 |
|
Gone Wild
Join Date: Dec 2010
Location: Orlando
Posts: 382
|
Re: Speed magnet
Not that I know of since those magnets are welded on. High speed Magnets only work on black motors since they have cup style sensor not grey motors because they all have the flat sensors.
|
|
|
|
|
02-05-2013, 08:00 PM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2011
Posts: 40
|
Re: Speed magnet
Ok thanks a bunch. I too thought the same thing.ay do the speedy link or the bandit motor.
|
|
|
|
|
02-05-2013, 10:51 PM
|
#4 | |
|
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: Speed magnet
Quote:
CartTrader |
|
|
|
|
|
02-06-2013, 09:12 AM
|
#5 | |
|
Gone Wild
Join Date: Dec 2010
Location: Orlando
Posts: 382
|
Re: Speed magnet
Quote:
|
|
|
|
|
|
02-06-2013, 11:42 AM
|
#6 |
|
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: Speed magnet
I have one on order. It should be here today or tomorrow. I got it off Ebay. I don`t know if site sponsors on here carry them or not. From what I was told, they go on the same as the adc (black) motors. They are on a little tighter than the adc motor magnets and harder to get off. Will let you know more when I get mine and "try" to install it.
CartTrader |
|
|
|
|
02-08-2013, 11:06 PM
|
#7 |
|
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: Speed magnet
Got my speed magnet for my GE motor today. Tomorrow I am going to "try" to install. Has anyone installed the speed magnet on the GE motor on a CC? If so what was your experience in doing it? Just how difficult is it to pry the old magnet off? I will try to document my changing of the magnet. Depends on how frustrated I get getting it off. Will try to take pics as I go.
CartTrader |
|
|
|
|
02-08-2013, 11:09 PM
|
#8 |
|
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: Speed magnet
I do hope it isn't welded on as Cmar says.
CartTrader |
|
|
|
|
02-10-2013, 01:31 AM
|
#9 |
|
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: Speed magnet
Got magnet installed. Ad stated it takes about 15 minutes. Took a bit longer than that. Biggest problem was getting in behind the old magnet to pry it off. Used a paint can opener that I had, that has a lip bent in the end. Once I found that it was almost a breeze.
CartTrader |
|
|
|
|
02-10-2013, 08:22 AM
|
#10 |
|
Gone Wild
Join Date: Dec 2010
Posts: 627
|
Re: Speed magnet
Good to know I had to take my motor off and send it to a electric mtr shop
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Anyone know the correct direction for the speed magnet | Electric Club Car | |||
| Speed Magnet | Electric Club Car | |||
| Another speed magnet ? | Electric EZGO | |||
| High Speed Magnet | Electric Club Car | |||
| Speed magnet and speedy link?? | Electric Club Car | |||
Linear Mode
