![]() |
![]() |
#1 |
Not Yet Wild
![]() Join Date: Sep 2013
Location: Louisiana
Posts: 46
|
![]() I have a 2009 EZGO RXV. Most of the lift kits I've seen on ebay are spindle lifts. Does anyone have any experience with the Madjax 6" A-Arm lift kit? Also, is it possible to do this lift and keep the stock tires? I'm trying to spread out the upgrades a bit.
http://www.ebay.com/itm/Lift-Kit-6-A...item461346d8af |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Just one day at a time
![]() ![]() Join Date: Sep 2009
Location: South TX
Posts: 8,645
|
![]() I have installed one of there lifts and it is a good kit, I believe you will need 10" wheels to install though.
|
![]() |
![]() |
![]() |
#3 |
Gone Wild
![]() Join Date: Apr 2012
Location: Georgia
Posts: 378
|
![]() I am real curious about that lift as well. Thanks LostHusker for the input. Has anyone else used the Madjax lift kit? I hate to say it but it seems awfully cheap compared to other brands, but maybe it is a good deal.
|
![]() |
![]() |
![]() |
#4 |
Not Yet Wild
![]() Join Date: Sep 2013
Location: Louisiana
Posts: 46
|
![]() Today is the last day that the lift is 10% off, so I think I may order it and hold on to it until I can get the tires.
|
![]() |
![]() |
![]() |
#5 |
Getting Wild
![]() Join Date: Jun 2013
Location: Sugar Land, TX
Posts: 126
|
![]() I've installed a bunch of the lift kits on Club Cars, but not on RXV. I like their kits a lot. Curious to know about RXV experiences.
|
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
Join Date: Jun 2014
Posts: 9
|
![]() Hey There
I am trying to install a Madjax 6inch a arm lift kit on a 2011 RXV. It looks good quality but I cannot get the steering to work so far, any ideas? |
![]() |
![]() |
![]() |
#7 |
Not Yet Wild
Join Date: Jun 2014
Posts: 9
|
![]() Just to let you know, I had an issue with the steering binding up because the change in angle on the track rod ends was too much. Madjax supplied extension pieces which took care of the issue.
Excellent customer service! |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
planning a build.. suggestions and comments? | Gas EZGO | |||
Battery Savers - Comments | Electric EZGO |