will a 1997 g11 rear end fit in a 1991 g9

monstertruckr91 · 11-18-2008, 11:42 PM

i was wondering if a g11 will bolt up to a g9 rear end as a direct swap and if it does is there any advantages or dis advantages will it make cart faster or slower or the same ? i noticed the g11 rear end has a tag on it that says spicer (dana) wouldnt this be a better rear end

shawn.m · 11-19-2008, 12:38 AM

get the tape measure out and take a look see. most of the golf carts are 14:1

I dont know a lot about the G11 so cant answer your other questions

spriddle · 11-19-2008, 07:57 AM

I think it would work with a little modding. The shock and front mount hookups are different. Not sure about the bolt pattern to the frame. I really don't know that you will gain much speed either.

monstertruckr91 · 11-19-2008, 08:24 AM

only thing that looks different is the pumkin everything else looks the same where the cables hook up the governer and the bolts and shocks look identical but i was wondering if any ones tried this before i think the dana rear end would be tougher

shawn.m · 11-19-2008, 08:49 AM

stock one is pretty tough - at least until you add 50 more HP.

spriddle · 11-19-2008, 08:53 AM

Quote:

Originally Posted by shawn.m

stock one is pretty tough - at least until you add 50 more HP.

And jump rocks and stumps with it.

Isn't that right Shawn?

monstertruckr91 · 11-19-2008, 09:16 AM

the other thing is that the g11 rear end is set up like a truck or car with a diff cover and the other one dosent have that ive been thinking about welding the spiders up for posi unless theres a different way it will be mostly driven off road and on a little

spriddle · 11-19-2008, 09:29 AM

The only problems I've heard of with doing this is it will cause a little aggrevation when turning on road. I would say you might run a risk of breaking something in the rear chunk as well. On a positive note, it should definitely help when off roading. Nothing more aggrevating than getting stuck caddycorner in a ditch or something with only one wheel pulling. Rocking back and forth gets old.

shawn.m · 11-19-2008, 11:52 AM

Quote:

Originally Posted by spriddle

And jump rocks and stumps with it.

Isn't that right Shawn?

maybe

their is a reason that I left the stock piece of sheet metal under the swing arm. It lets me slide over more stuff.

Nowdays I drive the G16 all the time and it goes way more places than the G9

monstertruckr91 · 11-20-2008, 09:28 AM

ok so i talked to tom at cpp and found out apparently i have a newer style g-16 rear end and he said it will bolt right up so i think im gonna try it shouldnt take long and mabe this will fix my problem

11-18-2008, 11:42 PM	#1
monstertruckr91 Getting Wild Join Date: Sep 2008 Posts: 94	will a 1997 g11 rear end fit in a 1991 g9 i was wondering if a g11 will bolt up to a g9 rear end as a direct swap and if it does is there any advantages or dis advantages will it make cart faster or slower or the same ? i noticed the g11 rear end has a tag on it that says spicer (dana) wouldnt this be a better rear end

11-19-2008, 12:38 AM	#2
shawn.m Gone Wild Join Date: Aug 2007 Location: near sacramento,ca Posts: 1,895	Re: will a 1997 g11 rear end fit in a 1991 g9 get the tape measure out and take a look see. most of the golf carts are 14:1 I dont know a lot about the G11 so cant answer your other questions

11-19-2008, 07:57 AM	#3
spriddle Admin Join Date: Dec 2006 Location: TN Posts: 101,873	Re: will a 1997 g11 rear end fit in a 1991 g9 I think it would work with a little modding. The shock and front mount hookups are different. Not sure about the bolt pattern to the frame. I really don't know that you will gain much speed either.

11-19-2008, 08:24 AM	#4
monstertruckr91 Getting Wild Join Date: Sep 2008 Posts: 94	Re: will a 1997 g11 rear end fit in a 1991 g9 only thing that looks different is the pumkin everything else looks the same where the cables hook up the governer and the bolts and shocks look identical but i was wondering if any ones tried this before i think the dana rear end would be tougher

11-19-2008, 08:49 AM	#5
shawn.m Gone Wild Join Date: Aug 2007 Location: near sacramento,ca Posts: 1,895	Re: will a 1997 g11 rear end fit in a 1991 g9 stock one is pretty tough - at least until you add 50 more HP.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

11-19-2008, 09:16 AM	#7
monstertruckr91 Getting Wild Join Date: Sep 2008 Posts: 94	Re: will a 1997 g11 rear end fit in a 1991 g9 the other thing is that the g11 rear end is set up like a truck or car with a diff cover and the other one dosent have that ive been thinking about welding the spiders up for posi unless theres a different way it will be mostly driven off road and on a little

11-19-2008, 09:29 AM	#8
spriddle Admin Join Date: Dec 2006 Location: TN Posts: 101,873	Re: will a 1997 g11 rear end fit in a 1991 g9 The only problems I've heard of with doing this is it will cause a little aggrevation when turning on road. I would say you might run a risk of breaking something in the rear chunk as well. On a positive note, it should definitely help when off roading. Nothing more aggrevating than getting stuck caddycorner in a ditch or something with only one wheel pulling. Rocking back and forth gets old.

11-20-2008, 09:28 AM	#10
monstertruckr91 Getting Wild Join Date: Sep 2008 Posts: 94	Re: will a 1997 g11 rear end fit in a 1991 g9 ok so i talked to tom at cpp and found out apparently i have a newer style g-16 rear end and he said it will bolt right up so i think im gonna try it shouldnt take long and mabe this will fix my problem

Similar Threads
Thread	Forum
greetings folks ez-go txt 1997	Gas EZGO
fe 290 1997 what is it worth	Gas Club Car
1997 club car	Electric Club Car
1997 TXT Restoration	Gas EZGO
1997 E-Z-NOT SO SLOW TXT	Videos