|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-20-2008, 09:30 AM | #11 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: will a 1997 g11 rear end fit in a 1991 g9
Tom is the man!!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-20-2008, 09:27 PM | #12 |
Getting Wild
Join Date: Sep 2008
Posts: 94
|
Re: will a 1997 g11 rear end fit in a 1991 g9
ok so i ran into a problem im working on this thing out side and its 28 deg. out there whoo cold....i measured the g9 and the bolt pattern is 2.5 in between the bolts and the g-16 is only 2 in any info or ideas on the swap ??????
|
11-21-2008, 11:18 AM | #13 |
Gone Wild
Join Date: Aug 2007
Location: near sacramento,ca
Posts: 1,895
|
Re: will a 1997 g11 rear end fit in a 1991 g9
ship me your g16 rearend
Other wise you can slot the holes in the mounting plates |
11-23-2008, 08:12 PM | #14 |
Getting Wild
Join Date: Sep 2008
Posts: 94
|
Re: will a 1997 g11 rear end fit in a 1991 g9
ok so i got the g-16 rear end in the g-9 and ran into a few problems like first i unbolted the g-16 rear end from its mounting plate and fliped it over and theres a half dollar size hole in the housing so i took it up to a shop and had them weld it up so now were good on that
then i put the rear end in the g-9 and only one mounting hole lines up and the bolt under thecarrier lines up too none of the other ones do so im gonna drill out the mounting plate and make it work and my buddy is going to come over and tack weld it into place for extra strength and weld up the spiders so i have posi i think i can make the shocks work with the g-16 on the outside of where they are sposed to mount over all the g-16 is 2 in wider so the rear tires stick out a bit but i dont care just thought i would share some insight if any one decides to do this and going to buy some 22x11x10 tires (4) for 25 bucks wow......... |
11-23-2008, 08:28 PM | #15 |
Gone Wild
Join Date: Sep 2007
Location: maine
Posts: 3,352
|
Re: will a 1997 g11 rear end fit in a 1991 g9
if you are trying to bolt a g16 rear end in a g9 you will have to do some mods the bolt pattern is different on the swing arm it is a little different.
|
11-23-2008, 08:32 PM | #16 |
Gone Wild
Join Date: Sep 2007
Location: maine
Posts: 3,352
|
Re: will a 1997 g11 rear end fit in a 1991 g9
oh sorry i didn't read the whole thread . i guess you found out lol
|
11-23-2008, 10:52 PM | #17 |
Getting Wild
Join Date: Sep 2008
Posts: 94
|
Re: will a 1997 g11 rear end fit in a 1991 g9
has this been done before??
any one have any pics of a swap |
11-23-2008, 11:02 PM | #18 |
Getting Wild
Join Date: Sep 2008
Location: long island
Posts: 83
|
Re: will a 1997 g11 rear end fit in a 1991 g9
monstertruckr91 are there other parts from the g11 that you have access to i am looking for body parts
|
11-23-2008, 11:21 PM | #19 |
Getting Wild
Join Date: Sep 2008
Posts: 94
|
Re: will a 1997 g11 rear end fit in a 1991 g9
no all i have is a rear swing arm and motor with starter and belts
if any one needs a swing arm let me know cause i dont need it |
11-27-2008, 09:24 PM | #20 |
Getting Wild
Join Date: Sep 2008
Posts: 94
|
Re: will a 1997 g11 rear end fit in a 1991 g9
just thought i would let everyone know i "got er done" no perfect but works well ended up welding into place and welding up spiders and welded a new muffler on it it sounds great not to loud but not to quiet
now all i have to do is lift it and get some wheels for the tires i got and ill be set for now |
|
|
Similar Threads | ||||
Thread | Forum | |||
greetings folks ez-go txt 1997 | Gas EZGO | |||
fe 290 1997 what is it worth | Gas Club Car | |||
1997 club car | Electric Club Car | |||
1997 TXT Restoration | Gas EZGO | |||
1997 E-Z-NOT SO SLOW TXT | Videos |