Still need support not running g9

[DoubleEgan]

yamaha 94 G9e
I tested the motor and it works
checked all wiring
cleaned all wiring
Only 1 fuse and its good
using meter
with peddle pressed
1. Solenoid clicks
2. 2 top post meter reads 16.4
3. 2 small post read 0
4. all over connections read 0 , rev/forward switch, motor a2 s2 - s1 s2
same result in forward or reverse

peddle released
1. 2 top post meter reads 0
2. 2 small post read 38.4
3. all over connections read 0 , rev/forward switch, motor a2 s2 - s1 s2
same result in forward or reverse

[DoubleEgan]

help from any buddy
Rechecked all wiring, it's correct and tight
New fuse to just trying any thing Fuse is getting 38v
Relay showing 0
How do i test controll panel?

[DoubleEgan]

Took speed controller box apart
No burnt or corroded wires all looks like new
There is an + and - the + side runs to selinoid - side and I have connection
If I use meter on + and - on controller box it shows no power if pedal is pressed or not

Please people running out of what to look at

[MudHog]

Does your multimeter have a diode test setting? Your G9 has two diodes like my G8 and one or both could be bad. Check power at the micro switch on the bottom of the f/r switch.

[DoubleEgan]

well I did a couple of test thinking pictures will explain better and tell me if I am doing it correct

[DoubleEgan]

more pics