Ezgo "Beast"?

Helirich · 09-10-2015, 03:56 PM

Thanks for clearing the letters up. The guy who sold me the TXT said I could get a chip to make it faster. I have no desire to do that because of swapping, but I'm curious where the chip is. Also, I guess I will keep all the old stuff for my Marithon. (I realize that might be a difficult swap)

I figured I would upgrade the cables. Although the Beast may already have good cables. ( Except for the ones forced in to the batteries) Does the switch hook directly to the main controller or are you saying it hooks to another controller strictly for the F/R.

I took a look at the only pic I got of the under seat of the Beast. It has a DCX controller. Can't see any numbers. I'm hoping the wiring is the same as a stock TXT, but if it's differnt, I hope I can get a diagram from Beast.

Sir Nuke · 09-10-2015, 06:12 PM

although they call it a "CHIP" in reality its different plugs or jumpers. there is a plug on the controller that they plug into.

PDS chip wiring2.jpg

PDS_Performance_Plugs.jpg

09-10-2015, 03:56 PM	#11
Helirich Gone Wild Join Date: Sep 2015 Posts: 572	Re: Ezgo "Beast"? Thanks for clearing the letters up. The guy who sold me the TXT said I could get a chip to make it faster. I have no desire to do that because of swapping, but I'm curious where the chip is. Also, I guess I will keep all the old stuff for my Marithon. (I realize that might be a difficult swap) I figured I would upgrade the cables. Although the Beast may already have good cables. ( Except for the ones forced in to the batteries) Does the switch hook directly to the main controller or are you saying it hooks to another controller strictly for the F/R. I took a look at the only pic I got of the under seat of the Beast. It has a DCX controller. Can't see any numbers. I'm hoping the wiring is the same as a stock TXT, but if it's differnt, I hope I can get a diagram from Beast.
Helirich Gone Wild Join Date: Sep 2015 Posts: 572

09-10-2015, 06:12 PM	#12
Sir Nuke Master of All Things Join Date: May 2013 Location: West Columbia, Texas Posts: 17,976	Re: Ezgo "Beast"? although they call it a "CHIP" in reality its different plugs or jumpers. there is a plug on the controller that they plug into. PDS chip wiring2.jpg PDS_Performance_Plugs.jpg

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Why "Carbon Fiber" "Wood grain" and Diamond Plated?	Gas EZGO
What kind of offset is my EZGO RXV w/Jakes 6" Lift Kit and 2" spacer rear and 1" back	Lifted Golf Carts
Anyone running a "Beast" motor?	Electric EZGO
Has anyone installed the "The Beast", how did it work?	Electric EZGO
Here is a shot of the "Beast"	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum