09 RXV moves very slowly

GEVJOE · 10-09-2015, 07:11 AM

I know that i posted about this a couple weeks ago but I was unable to find it. I have a 09 RXV that moves very slowly. the brake assembly is not causing this as you can put it in "TOW" and push the vehicle easily. From what I found is there is a "Encoder bearing sensor" in the motor that seems to be causing problems and putting controller into "Limp" mode. Any thoughts?

cgtech · 10-09-2015, 09:34 AM

Check the ohms on the motor temp sensor, its the other 2-wire plug at the motor. You need an oscilloscope to do any self-testing of the encoder.

10-09-2015, 07:11 AM	#1
GEVJOE Not Yet Wild Join Date: Jul 2014 Posts: 38	09 RXV moves very slowly I know that i posted about this a couple weeks ago but I was unable to find it. I have a 09 RXV that moves very slowly. the brake assembly is not causing this as you can put it in "TOW" and push the vehicle easily. From what I found is there is a "Encoder bearing sensor" in the motor that seems to be causing problems and putting controller into "Limp" mode. Any thoughts?
GEVJOE Not Yet Wild Join Date: Jul 2014 Posts: 38

10-09-2015, 09:34 AM	#2
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: 09 RXV moves very slowly Check the ohms on the motor temp sensor, its the other 2-wire plug at the motor. You need an oscilloscope to do any self-testing of the encoder.

Similar Threads
Thread	Forum
Slowly coming along	Gas Harley Davidson
89 club car moves slow in forward and barely moves in reverse	Electric Club Car
My 98 TXT going through the change! Slowly...	Lifted Golf Carts
g1 slowly moves-but batteries charged	Electric Yamaha
Getting this wiring done slowly!	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum