|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
05-02-2018, 06:08 AM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 28
|
Correct way to wire in switch for voltage reducer
So I swear I saw a thread about wiring in a switch or relay to switch off power to the converter. But of course now I can't find it.
Does someone have a parts list or diagram for safely wiring in a 4 wire reducer? Sent from my SM-G955U using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-02-2018, 08:28 AM
|
#2 |
|
Gone Wild
 Join Date: Oct 2016
Location: Dundee quebec
Posts: 3,190
|
Re: Correct way to wire in switch for voltage reducer
If your reducer does not have a trigger wire, is is not designed to be switched on and off. Wire per instructions.
|
|
|
|
|
05-02-2018, 12:25 PM
|
#3 | |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 28
|
Re: Correct way to wire in switch for voltage reducer
Quote:
Sent from my SM-G955U using Tapatalk |
|
|
|
|
|
05-02-2018, 12:36 PM
|
#4 |
|
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,214
|
Re: Correct way to wire in switch for voltage reducer
You can add a switch to manually turn it on/off. Put it between pack + and reducer.
|
|
|
|
|
05-02-2018, 12:36 PM
|
#5 |
|
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Correct way to wire in switch for voltage reducer
scottyb has then here http://www.cartsunlimited.net/12v-reducers.html
|
|
|
|
|
05-02-2018, 12:40 PM
|
#6 | |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 28
|
Re: Correct way to wire in switch for voltage reducer
Quote:
Sent from my SM-G955U using Tapatalk |
|
|
|
|
|
05-02-2018, 12:47 PM
|
#7 |
|
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,214
|
Re: Correct way to wire in switch for voltage reducer
Anything heavy duty enough to handle the current. I use a shallow home receptacle box with a regular light switch. Some have laughed at it but it works fine.
Look under my threads for "36v - 12v reducer". You will see a photo of it. I would post the link for you but I don't know how. |
|
|
|
|
05-03-2018, 05:28 AM
|
#8 |
|
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Correct way to wire in switch for voltage reducer
MC, when you have a thread link you want to post, just go to that thread and in the address bar at the top of the page "highlight" it all and then hit Ctrl + C to copy it (or right click in the highlighted bar and select Copy) and then when you go to the Reply post and click in the box, then hit Ctrl + P to paste (or right click in the box and select Paste) and 'Voila, you will have a hyperlink to the thread you want them to see...
If you have a particular post that you want to direct them too, go to that post and in the upper right hand corner of the post, right click on the post number and then select "Copy Link Location" then when you go to the Reply post and click in the box, just right click and select Paste and 'Voila, you will have a hyperlink to that individual post... Gotcha covered like a glove brotha....  |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Question on running wire from key switch to voltage reducer | Electric EZGO | |||
| Is this the correct way to wire 48 volt reducer and fuse block? | Electric EZGO | |||
| Question about wiring voltage reducer and voltage meter to key switch | Electric EZGO | |||
| Correct Voltage Reducer Connection location | Electric Club Car | |||
| Whats the correct way to wire my voltage reducer and fuse block? | Electric EZGO | |||
Linear Mode
