|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-06-2018, 06:41 AM | #1 |
Not Yet Wild
Join Date: Mar 2018
Posts: 11
|
G29 drive 48v.
Where is the 3 amp fuse located. My golf just stopped working. Batteries are good
Sent from my SM-G965U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-06-2018, 09:16 AM | #2 |
Not Yet Wild
Join Date: Jun 2018
Posts: 28
|
Re: G29 drive 48v.
Should be near the LH roof support/ roof gutter in the wiring harness. At least it is on my 2010. Have to open the motor cover and look down to the left.
|
07-06-2018, 05:48 PM | #3 |
Getting Wild
Join Date: Jun 2017
Posts: 78
|
Re: G29 drive 48v.
That’s where mine is on my 2008.
|
07-10-2018, 04:22 AM | #4 |
Not Yet Wild
Join Date: Oct 2013
Location: Texas
Posts: 70
|
Re: G29 drive 48v.
Are you saying that the rear cover must be removed to get at the fuse! Is it a standard auto type 3 amp?
Just want to know as I never knw when a repair may need to happen! |
07-10-2018, 04:43 AM | #5 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G29 drive 48v.
Lol, yep. Either by the left side rain gutter, or just behind the main cross bar at the controller. Both behind the access panel... Typical automotive fuse. You thought they wanted you to work on your own stuff? It gets much worse.......hope you don't own a John Deere, they really hate the idea you could fix what you bought.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
08 Yamaha drive grinding between reverse and drive | Gas Yamaha | |||
I NEED A USED power drive plus regen 2 for Club Car Ds Sepex drive. | Electric Club Car | |||
Drive clutch doesn't disengage from drive belt | Gas EZGO | |||
2008 yamaha drive drive belt | Gas Yamaha | |||
High Altitude Drive Clutch and Drive Belt | Gas EZGO |