lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 07-30-2018, 07:50 PM   #1
skullskidr
Not Yet Wild
 
Join Date: Jun 2018
Posts: 28
Default 2010 ydre suspension issue

Well... bro in law decided that he needed to help jack up our golf cart. The jack slipped and it bent the little bar that appears to center the rear and keep it in place. It reminds me of a panhard bar. The bolts are very tight. Is there a secret to removing them? I don’t want something to get messed up any further.
Thanks in advance,
Kelley
skullskidr is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 07-30-2018, 07:55 PM   #2
LukeL
Gone Wild
 
LukeL's Avatar
Club Car
 
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
Default Re: 2010 ydre suspension issue

I have done the same thing myself. I usually try to bend it back in place. Find a pry bar or something to get leverage behind it.


Club Car DS driver’s club #59
LukeL is offline   Reply With Quote
Old 07-30-2018, 09:22 PM   #3
skullskidr
Not Yet Wild
 
Join Date: Jun 2018
Posts: 28
Default Re: 2010 ydre suspension issue

I like the idea. But, the bar has a hairline crack in it and a new one was $30.
skullskidr is offline   Reply With Quote
Old 07-30-2018, 09:23 PM   #4
LukeL
Gone Wild
 
LukeL's Avatar
Club Car
 
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
Default Re: 2010 ydre suspension issue

Have you tried the impact wrench? I’d be surprised if they’re that tight.


Club Car DS driver’s club #59
LukeL is offline   Reply With Quote
Old 07-30-2018, 09:26 PM   #5
skullskidr
Not Yet Wild
 
Join Date: Jun 2018
Posts: 28
Default Re: 2010 ydre suspension issue

I did. Used my 20v 1/2 inch impact and they didn’t budge. I wondered if they might be Reverse thread or a weird lock nut.
skullskidr is offline   Reply With Quote
Old 07-31-2018, 09:58 AM   #6
PingEye3
Gone Wild
 
PingEye3's Avatar
Club Car
 
Join Date: Sep 2014
Location: Orlando, FL
Posts: 1,308
Default Re: 2010 ydre suspension issue

Every bolt on a G29 is tight light that, probably need a 1/2" breaker bar to break them loose on the panhard bar.
PingEye3 is offline   Reply With Quote
Old 08-04-2018, 12:37 PM   #7
skullskidr
Not Yet Wild
 
Join Date: Jun 2018
Posts: 28
Default Re: 2010 ydre suspension issue

Cool! I’m just back to work on it today. I’ll give the breaker bar a whirl. Thanks!
skullskidr is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha




Similar Threads
Thread Forum
Need advice. 2010 Yamaha ydre g29 Electric Yamaha
2010 Yamaha YDRE Electric Yamaha
2010 Yamaha YDRE Electric Yamaha
2010 YDRE G29 regen questions Electric Yamaha
Alltrax programming 2010 ydre Electric Yamaha


All times are GMT -5. The time now is 04:25 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.