04-16-2009, 02:29 PM | #1 |
Not Yet Wild
Join Date: Apr 2009
Posts: 6
|
90' Flathead Engine Shaft
Does anyone know the following?
Is the shaft on the 90' flathead engine where the clutch connects tappered or straight? What is the size and length of the shaft ? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-16-2009, 09:22 PM | #2 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: 90' Flathead Engine Shaft
To be totally honest, I don't....
I am curious why you need to know though? But, I'm going to guess... (I'm good at this after I've had a few beers! ) You are trying to find a replacement engine for your KF82, But, want to reuse your existing drive clutch? It'll help getting a faster answer, if you give an idea of what your looking to do! (Maybe there will be some inexpensive alternatives) |
04-17-2009, 06:09 AM | #3 |
Not Yet Wild
Join Date: Apr 2009
Posts: 6
|
Re: 90' Flathead Engine Shaft
Well, drink no more because you have it.. Yes I want to figure out what engine I can use.. I have several lying around...
kapt |
06-03-2009, 09:45 AM | #4 |
Not Yet Wild
Join Date: May 2009
Posts: 1
|
Re: 90' Flathead Engine Shaft
It is tapered, I don't know what the taper per inch is but I have the same engine and I am rebuilding it also.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
vertical shaft engine | Big Block Talk! | |||
Brand Spankin New!! 16hp Lifan Gas Engine Electric Start 1 Horizontal Shaft | Golf Carts and Parts | |||
vertical shaft engine | Big Block Talk! | |||
Which engine shaft do I need? | Big Block Talk! | |||
drop in engine for old flathead | Gas Club Car |