OK. I need to try to fool my cart.

SpeedyVol · 03-06-2010, 08:49 PM

I have asked this question a few times. My 97' EZGO TXT Series cart is much faster and has much more torque in reverse than in forward. I am to the point that I back up steep hills.

Is there any way to rewire the forward/reverse switch to fool my cart into thinking it is in reverse when it is really in forward? I hate to buy a new controller if I don't really need one.

bhfear · 03-06-2010, 11:26 PM

What kind of controller do you have, is it an alltrax or stock

SpeedyVol · 03-07-2010, 12:44 AM

Stock controller. I think it is a Curtis 1206. Stock motor also.

bhfear · 03-07-2010, 11:46 AM

http://www.buggiesgonewild.com/elect...g-manuals.html

check that out it may help a little bit, we need to confirm that your cart is actually wired correctly before we can continue to diagnose, yours is the non-dcs images

FIXEROFCARTS · 03-08-2010, 09:19 AM

Switch the A1 and A2 wires

SpeedyVol · 03-10-2010, 02:04 AM

I will try switching A1 and A2. Could it possibly hurt anything if I do that? I can't afford to buy a new motor.

Paxdad · 03-10-2010, 07:07 AM

No it will not hurt it.

SpeedyVol · 03-10-2010, 10:10 PM

OK guys. I switched the A1 & A2 wires and I am proud to announce that I am back in the game!!!! The only thing is that my shifter handle is now reversed. Hey, I'm not gonna complain. The cart hasn't gone that fast in forward since I purchased it.

03-06-2010, 08:49 PM	#1
SpeedyVol Not Yet Wild Join Date: Feb 2010 Posts: 64	OK. I need to try to fool my cart. I have asked this question a few times. My 97' EZGO TXT Series cart is much faster and has much more torque in reverse than in forward. I am to the point that I back up steep hills. Is there any way to rewire the forward/reverse switch to fool my cart into thinking it is in reverse when it is really in forward? I hate to buy a new controller if I don't really need one.
SpeedyVol Not Yet Wild Join Date: Feb 2010 Posts: 64

03-06-2010, 11:26 PM	#2
bhfear EZ-GO-N Join Date: Dec 2007 Location: Geneseo, IL Posts: 505	Re: OK. I need to try to fool my cart. What kind of controller do you have, is it an alltrax or stock

03-07-2010, 12:44 AM	#3
SpeedyVol Not Yet Wild Join Date: Feb 2010 Posts: 64	Re: OK. I need to try to fool my cart. Stock controller. I think it is a Curtis 1206. Stock motor also.
SpeedyVol Not Yet Wild Join Date: Feb 2010 Posts: 64

03-07-2010, 11:46 AM	#4
bhfear EZ-GO-N Join Date: Dec 2007 Location: Geneseo, IL Posts: 505	Re: OK. I need to try to fool my cart. http://www.buggiesgonewild.com/elect...g-manuals.html check that out it may help a little bit, we need to confirm that your cart is actually wired correctly before we can continue to diagnose, yours is the non-dcs images

03-08-2010, 09:19 AM	#5
FIXEROFCARTS Gone Wild Join Date: Feb 2009 Location: Not sure yet Posts: 500	Re: OK. I need to try to fool my cart. Switch the A1 and A2 wires

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-10-2010, 02:04 AM	#6
SpeedyVol Not Yet Wild Join Date: Feb 2010 Posts: 64	Re: OK. I need to try to fool my cart. I will try switching A1 and A2. Could it possibly hurt anything if I do that? I can't afford to buy a new motor.
SpeedyVol Not Yet Wild Join Date: Feb 2010 Posts: 64

03-10-2010, 07:07 AM	#7
Paxdad Gone Wild Join Date: Aug 2008 Location: Cumming, GA Posts: 313	Re: OK. I need to try to fool my cart. No it will not hurt it.

03-10-2010, 10:10 PM	#8
SpeedyVol Not Yet Wild Join Date: Feb 2010 Posts: 64	Re: OK. I need to try to fool my cart. OK guys. I switched the A1 & A2 wires and I am proud to announce that I am back in the game!!!! The only thing is that my shifter handle is now reversed. Hey, I'm not gonna complain. The cart hasn't gone that fast in forward since I purchased it.
SpeedyVol Not Yet Wild Join Date: Feb 2010 Posts: 64