07-29-2010, 07:36 PM | #1 |
Gone Wild
Join Date: Jan 2007
Location: La Porte Indiana
Posts: 1,392
|
carryall lift question
i have a question for you lifted guys out there.
I am lifting a carryall with a 6 inch lift. I have never worked on one of these before. this one had overload brackets/bumpstops on the top of the axle. when i did the lift these can no longer be reattached. so did you guys just leave these off or did you make entirely new ones? i have been looking at fabbing something up as i could see where the originals hit the frame. but now there is a whole lot more than the 2 3/8 inch clearance than it had from the factory. any help/advise/pictures would be greatly appreciated! thanks, Aaron |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-04-2010, 02:17 PM | #2 |
Gone Wild
Join Date: Feb 2009
Location: PA
Posts: 173
|
Re: carryall lift question
when i lifted mine i didnt re attach them. i didnt see the need for them. so i left them off.. and i havent had any problems.. the leafs are pretty ridged in the back...
just my 2 cents... |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Lift kit for 91 clubcar carryall 2 | Lifted Golf Carts | |||
How to lift rear on 98 Carryall II | Lifted Golf Carts | |||
2000 carryall lift | Gas Club Car | |||
carryall lift | Gas Club Car | |||
94 Carryall 1 lift/wheel/tire combo question | Lifted Golf Carts |