Clutch Removal 2004 TXT

toolguy134 · 12-09-2010, 12:05 AM

Hi Guys Well the cart project is fully under way. 5 inch lift rear springs just installed and now I need to replace my drived clutch with the new Performance unit I bought .....looking on how to get the old one off ?

Also looking for shock extensions found Mr Gaskit no sure if they fit ???

Tool Guy

scottyb · 12-09-2010, 09:32 AM

The driven clutch has a small 13mm bolt keeping it on. Remove the belt and the nut and slide the clutch off, so the manual says. All shock threads are the same. Hope that helps

toolguy134 · 12-15-2010, 09:39 AM

My manual says you need a clutch puller 19779-G2 for the rear driven clutch .
I have never seen one but my be a bolt and a rod smaller diameter than the bolt would work but that length > ?

kaolinemine · 12-15-2010, 07:49 PM

I have pulled a lot of txt drive clutch an also the driven clutch , the driven clutch is like they have said , remove the 13 mm head bolt in the center and the clutch will slide off of the splines , may have to bump it off due to rust. You will need a puller (bolt) to press the drive clutch off, I have also had to put grease in ahead of the puller bolt to hydraulically press it off.

12-09-2010, 12:05 AM	#1
toolguy134 Not Yet Wild Join Date: Oct 2010 Location: Great White North EH Posts: 13	Clutch Removal 2004 TXT Hi Guys Well the cart project is fully under way. 5 inch lift rear springs just installed and now I need to replace my drived clutch with the new Performance unit I bought .....looking on how to get the old one off ? Also looking for shock extensions found Mr Gaskit no sure if they fit ??? Tool Guy

12-09-2010, 09:32 AM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: Clutch Removal 2004 TXT The driven clutch has a small 13mm bolt keeping it on. Remove the belt and the nut and slide the clutch off, so the manual says. All shock threads are the same. Hope that helps

12-15-2010, 09:39 AM	#3
toolguy134 Not Yet Wild Join Date: Oct 2010 Location: Great White North EH Posts: 13	Re: Clutch Removal 2004 TXT My manual says you need a clutch puller 19779-G2 for the rear driven clutch . I have never seen one but my be a bolt and a rod smaller diameter than the bolt would work but that length > ?

12-15-2010, 07:49 PM	#4
kaolinemine Not Yet Wild Join Date: Nov 2010 Location: Gordon GA Posts: 37	Re: Clutch Removal 2004 TXT I have pulled a lot of txt drive clutch an also the driven clutch , the driven clutch is like they have said , remove the 13 mm head bolt in the center and the clutch will slide off of the splines , may have to bump it off due to rust. You will need a puller (bolt) to press the drive clutch off, I have also had to put grease in ahead of the puller bolt to hydraulically press it off.

Similar Threads
Thread	Forum
Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch	Gas Club Car
clutch removal	Gas Club Car
clutch removal	Gas Club Car
99 EZ GO clutch removal	Gas EZGO
clutch removal	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum