|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-15-2013, 05:23 PM | #1 |
Gone Wild
Join Date: Dec 2010
Location: Orlando
Posts: 382
|
Workhorse dump switch wiring diagram
I just picked up the dump switch from this post http://www.buggiesgonewild.com/ezgo-...-dump-bed.html
at Napa and after looking at the side of it I am confused if it should be wired just as essness posted at the end in his wiring diagram. To me it looks like lead 6 and 3 are negative to battery and 4+1 is positive to battery or vice versa. If someone can verify that by looking at the picture I posted of the side of the switch I would appreciate it. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-15-2013, 06:02 PM | #2 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: Workhorse dump switch wiring diagram
2 to lift
5 to lift jumper 1 to 6 to positive battery jumper 3 to 4 to Negative battery |
01-15-2013, 06:40 PM | #3 |
Gone Wild
Join Date: Dec 2010
Location: Orlando
Posts: 382
|
Re: Workhorse dump switch wiring diagram
Thanks....but why 1 and 6 to positive? Since the direction of both on the schematic are facing the opposite way I would think that the wouldnt be on the same pole. Can you explain that? Thanks
|
01-16-2013, 11:11 AM | #4 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: Workhorse dump switch wiring diagram
In Esses picture you will see the jumpers crisscrossing to reverse the direction the current flows.
|
02-16-2013, 10:51 PM | #5 |
Not Yet Wild
Join Date: Jan 2013
Posts: 23
|
Re: Workhorse dump switch wiring diagram
I just installed a dump kit today after I put my rebuilt engine back in. I bought a 700 # Warren linear actuator off ebay. It has a 12" stroke, so it's not a direct bolt in. I had to move the attachment point toward the front of the bed to open and close properly. I bought the DPDT switch at the local parts store. Total cost was under $100. Here's how I wired it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Wiring Diagram for F&R Switch | Electric EZGO | |||
Need wiring diagram for 1996 EZGO workhorse Model GXT804D | Gas EZGO | |||
Workhorse switch wiring screwed up wont come on now | Electric EZGO | |||
Wiring Diagram Key Switch | Gas Columbia ParCar | |||
F&R switch wiring diagram ? | Electric Club Car |