|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-07-2013, 09:41 PM | #1 |
Not Yet Wild
Join Date: Dec 2012
Location: Kentucky
Posts: 42
|
G2 Swing arm bushings
Can't put them in the power coat oven, got them out this afternoon. Kind of a pain.
Anyway, where can I buy new ones? Is this a Yamaha dealer item? Would a site sponsor have them? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-08-2013, 07:06 AM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,010
|
Re: G2 Swing arm bushings
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
03-08-2013, 08:00 AM | #3 |
Gone Wild
Join Date: Sep 2012
Location: bikini state
Posts: 2,715
|
Re: G2 Swing arm bushings
i laughed my but off when i was at the powder coater a few weeks ago and they were doing 2 race car frames..when they pulled them out of the oven the mounts were dripping like pudding lol..they learned the hard way also
good luck with the cart bushings |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Help with swing arm design | Lifted Golf Carts | |||
WTB G9 bushing, swing arm | Golf Carts and Parts | |||
1980 G1 swing arm | Gas Yamaha | |||
Help with swing arm design | On Road Golf Carts! | |||
G9 swing arm drop | Design Center |