81 g1 hub

makobuggie · 03-10-2013, 03:14 PM

hello, im getting ready to put new bearings in the front hubs, i took the drivers side off ok, but the passenger side nut wont move at all,its not reverse thread on this side is it? i soak it with pb blaster and will try tomm to get it off,any ideas on this? thanks

abieex · 03-10-2013, 05:30 PM

Make sure there isn't a piece of the cotter pin left inside the nut. If all is good you might need a little heat on the nut only. It really shouldn't be on there that hard, soaking it overnight in blaster will probably do the trick. Good luck!

03-10-2013, 03:14 PM	#1
makobuggie Gone Wild Join Date: Jul 2011 Posts: 389	81 g1 hub hello, im getting ready to put new bearings in the front hubs, i took the drivers side off ok, but the passenger side nut wont move at all,its not reverse thread on this side is it? i soak it with pb blaster and will try tomm to get it off,any ideas on this? thanks
makobuggie Gone Wild Join Date: Jul 2011 Posts: 389

03-10-2013, 05:30 PM	#2
abieex Gone Loco Join Date: Aug 2012 Location: Cuyahoga Falls, Ohio Posts: 722	Re: 81 g1 hub Make sure there isn't a piece of the cotter pin left inside the nut. If all is good you might need a little heat on the nut only. It really shouldn't be on there that hard, soaking it overnight in blaster will probably do the trick. Good luck!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum