F/R switch problems

rozbaby627 · 07-13-2013, 10:19 PM

We are still having problems with our F/R Switch.

We recently upgraded our Motor, Controller, Solenoid, F/R Switch, and Wires.

They originally sent us the wrong F/R switch and we had problems. We thought the correct F/R switch would correct the problem but it hasn't. The contacts on the F/R switch are heating up and melting the plastic and the contact studs sink into the plastic and then the wires from the motor come lose. When this happens the F/R switch doesn't work. We can not keep them tight. We do not know why the wires are heating up. We are using 2 gauge wires.

07-13-2013, 10:19 PM	#1
rozbaby627 Not Yet Wild Join Date: Sep 2012 Posts: 14	F/R switch problems We are still having problems with our F/R Switch. We recently upgraded our Motor, Controller, Solenoid, F/R Switch, and Wires. They originally sent us the wrong F/R switch and we had problems. We thought the correct F/R switch would correct the problem but it hasn't. The contacts on the F/R switch are heating up and melting the plastic and the contact studs sink into the plastic and then the wires from the motor come lose. When this happens the F/R switch doesn't work. We can not keep them tight. We do not know why the wires are heating up. We are using 2 gauge wires.
rozbaby627 Not Yet Wild Join Date: Sep 2012 Posts: 14

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
key switch problems	Gas EZGO
Reed Switch Problems	Electric EZGO
Problems with Forward & Reverse Switch	Electric EZGO
1993 EZGO F/R switch problems	Electric EZGO
88 yamaha fand r switch problems	Electric Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum