Curtis 906 reset problem

LJ12530 · 03-22-2016, 03:28 PM

Replaced the OBC on a friend's cart. Prior to the OBC replacement the Curtis meter was working properly. After the OBC reset the gauge showed 2 bars. I read the spec sheet about the gauge automatically resetting when the proper reset voltage is applied. It would not reset when on the charger.

I put a power supply on the meter, ran it up to about 60 volts and let in go for about 6 minutes or so. The gauge reset properly. Put it back in the dash and it worked OK for a couple of days. Now it is back to the 2 bar charge indication. I'm trying to figure out how replacing the OBC had any effect on the Curtis gauge.

Anyone experience the same issue?

03-22-2016, 03:28 PM	#1
LJ12530 Gone Wild Join Date: Nov 2011 Posts: 174	Curtis 906 reset problem Replaced the OBC on a friend's cart. Prior to the OBC replacement the Curtis meter was working properly. After the OBC reset the gauge showed 2 bars. I read the spec sheet about the gauge automatically resetting when the proper reset voltage is applied. It would not reset when on the charger. I put a power supply on the meter, ran it up to about 60 volts and let in go for about 6 minutes or so. The gauge reset properly. Put it back in the dash and it worked OK for a couple of days. Now it is back to the 2 bar charge indication. I'm trying to figure out how replacing the OBC had any effect on the Curtis gauge. Anyone experience the same issue?
LJ12530 Gone Wild Join Date: Nov 2011 Posts: 174

Similar Threads
Thread	Forum
Curtis Handheld 1313 4401 problem	Electric Club Car
Curtis 1268 problem	Lifted Golf Carts
club car/curtis speed controller problem / ?	Electric Club Car
OBC reset problem	Electric Club Car
Reset On Board Computer, Charging Problem	Extreme DC!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum