|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-26-2016, 08:58 PM | #1 |
Not Yet Wild
Join Date: Mar 2016
Posts: 51
|
99 EZGO Green Lights on Controller but wont move
I have a 99 EZGO. Everything worked great for the past 4 years. Batteries finally needed replacing so I bought new USA Batteries. Ran fine for about a day with the new batteries so I think I got it all wired back together correctly after the battery change. On the second day after replacing batteries I got in it and pressed the peddle and nothing happened. Messed around with a few things for about 30 minutes(didn't really do anything) and all of the sudden it started working again.
A week later I got on and it wouldn't move. I get 4 green flashes out of my controller and then it stays green. A couple of nights ago a friend suggested I bypass the reed switch. I bypassed the switch and it immediately worked. The next day I got on and took off across the field. On the way back it died. I haven't been able to get it to move since. Any suggestions on where I look next? Controller seems to say all is good(green lights) Voltage at the controller is between 51 and 52(this is a 48 volt cart.) Thanks. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-26-2016, 09:32 PM | #2 |
Not Yet Wild
Join Date: Mar 2016
Posts: 51
|
Re: 99 EZGO Green Lights on Controller but wont move
The solenoid does click when I push on the pedal.
|
03-26-2016, 10:29 PM | #3 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
|
Re: 99 EZGO Green Lights on Controller but wont move
OK we need more details. Series or DCS/PDS, and the 4 green flashes I take it has an Alltrax controler?
|
03-27-2016, 07:44 AM | #4 | |
Not Yet Wild
Join Date: Mar 2016
Posts: 51
|
Re: 99 EZGO Green Lights on Controller but wont move
Quote:
If my solenoid clicks when I press the pedal and I get all green lights does that mean my solenoid is working? Thanks |
|
03-27-2016, 07:56 AM | #5 |
Not Yet Wild
Join Date: Mar 2016
Posts: 51
|
Re: 99 EZGO Green Lights on Controller but wont move
Here are the specifics of my cart. Except that it has been upgraded to a 48v cart.
Make: TXT Type: Electric 36 V Model: TXT Standard Year: 1999 It has a Alltrax NPX controller |
03-27-2016, 10:17 AM | #6 |
Gone Wild
Join Date: Nov 2013
Posts: 706
|
Re: 99 EZGO Green Lights on Controller but wont move
Put it up on stands and push the throttle to the floor. I'm pretty sure at full throttle the light turns orange. If it does that I would say it's your F&R switch. If the lights dosnt change my next guess would be the ITS
|
03-27-2016, 10:20 AM | #7 |
Gone Wild
Join Date: Nov 2013
Posts: 706
|
Re: 99 EZGO Green Lights on Controller but wont move
End of first page
https://www.google.com/url?sa=t&sour..._NSg9X3ZUkNRGg |
03-27-2016, 11:04 AM | #8 |
Not Yet Wild
Join Date: Mar 2016
Posts: 51
|
Re: 99 EZGO Green Lights on Controller but wont move
Thanks Chris. Bases on what you are saying my next test should be with the ITS. I will take a look at it.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Ezgo dcs solenoid clicks but wont disengage and wont move | Electric EZGO | |||
melex 512e has good solenoid,36 volts to controller, wont move | Melex | |||
Green lights | Electric EZGO | |||
All Lights Green | Electric EZGO |