|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-10-2016, 10:42 PM | #1 |
Not Yet Wild
Join Date: Jan 2016
Location: Alabama
Posts: 26
|
DCS motor to PDS system
This may have been covered, but I could not find it. If I have a DCS motor is it the same basic motor as a PDS? If so, will I need to modify my wiring to install it in my PDS cart?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-10-2016, 11:01 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: DCS motor to PDS system
You cannot use it with a controller that monitors rpm. You can use it with an Alltrax DCX or XCT with rpm monitoring turned off
|
06-11-2016, 06:16 AM | #3 |
Not Yet Wild
Join Date: Jan 2016
Location: Alabama
Posts: 26
|
Re: DCS motor to PDS system
Thanks Scotty! My controller is stock. No go for that project.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
72v motor in a 60v system? Keyway VS. Spline? | Extreme DC! | |||
Convert 4x12V Battery System to a 6x8V System for '05 Precedent ??? | Electric Club Car | |||
Explination of AC motor system? | Electric EZGO | |||
Replacing A Lester 48 Volt System with a NEW Self Contained On-Board System | Electric Club Car | |||
Going to put in AC motor system (not air conditioning) | Lifted Golf Carts |