|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-08-2017, 03:05 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2017
Posts: 7
|
LED questions
I just got my EZGO RXV 48v and have been making some changes to it.
First thing is I replaced the halogen headlights and tail lights with LED equivalent bulbs. They're alright, but now the rear blinkers don't work and the front blinkers are weak. Any advice? Secondly, I got four LED lights (2 for the front and 2 in the rear) to mount. I have no idea what to do. They're supposed to be for a vehicle. Is there anything special I need to do since it's a cart? TIA! Sent from my iPad using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-08-2017, 03:16 PM
|
#2 | |
|
Not Yet Wild
Join Date: Feb 2016
Posts: 53
|
Re: LED questions
Quote:
Sent from my VS880PP using Tapatalk |
|
|
|
|
|
05-08-2017, 03:17 PM
|
#3 |
|
......................
 Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: LED questions
You need to replace the flasher relay with an led one
12V DC 0.02-20A Electronic LED Flasher Relay 3 Pin for Turn Signal Light https://www.walmart.com/ip/12V-DC-0....Light/46529330 |
|
|
|
|
05-08-2017, 09:51 PM
|
#4 |
|
Not Yet Wild
Join Date: Apr 2017
Posts: 7
|
Re: LED questions
Thanks, guys. I've ordered the part. Now, is there anything special I need to do for the extra lights I'm going to mount?
Sent from my iPad using Tapatalk |
|
|
|
|
05-08-2017, 09:53 PM
|
#5 |
|
Not Yet Wild
Join Date: Apr 2017
Posts: 7
|
Re: LED questions
Also, after taking a ride at night, I noticed the lights dimmed when I punched the accelerator. Is this typical behavior?
Sent from my iPad using Tapatalk |
|
|
|
|
05-09-2017, 08:43 AM
|
#6 |
|
Not Yet Wild
Join Date: Oct 2014
Posts: 6
|
Re: LED questions
Could be a high resistance connection, bad battery or voltage reducer if you use one. I've read where you should stay out of an RXV wiring harness.
Sent from my SAMSUNG-SM-G900A using Tapatalk |
|
|
|
|
05-09-2017, 12:28 PM
|
#7 |
|
Gone Wild
Join Date: Aug 2014
Location: fletcher,nc
Posts: 601
|
Re: LED questions
dont ground ANYTHING to the frame.
|
|
|
|
|
05-27-2017, 08:44 PM
|
#8 | |
|
Not Yet Wild
Join Date: Apr 2017
Posts: 7
|
Re: LED questions
Quote:
So I got the relay, but I'm still having the problem of no blinking in the rear. The lights work including the break lights, but not flashing. Sent from my iPad using Tapatalk |
|
|
|
|
|
05-28-2017, 10:35 AM
|
#9 |
|
Not Yet Wild
Join Date: Nov 2016
Location: West Columbia, SC
Posts: 51
|
Re: LED questions
Wilco,you mentioned you had four additional leds to hook up. What did you want those leds to do? Blink with turn signals, just light up when you throw a switch or just be on when the head lights are on?
|
|
|
|
|
06-04-2017, 01:03 PM
|
#10 | |
|
Not Yet Wild
Join Date: Apr 2017
Posts: 7
|
Re: LED questions
Quote:
I want them to light up with the switch. I have the wiring harness already. Just clueless on where to connect them on the converter. Thanks! Sent from my iPad using Tapatalk |
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 08 DS IQ questions | Electric Club Car | |||
| 07 EZ go questions | Electric EZGO | |||
| A few questions | Gas Club Car | |||
| some questions... | Extreme DC! | |||
| Pre-questions | Gas Club Car | |||
Linear Mode
