|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-10-2018, 06:15 PM | #1 |
Gone Wild
Join Date: Jan 2013
Location: Sun Lakes, Arizona
Posts: 610
|
Need help installing Alltrax XCT 48300 PDS 300
I have a friend that has a 2008 Precedent that is changing out his Curtis controller with an Alltrax XCT 48300 PDS 300. I have been searching Youtube and this site looking for pictures to give me ideas on how to mount and run all the wires. It said it was a plug and play operation but there are wires that have to be cut (4 pin connector on Curtis controller has no place to plug into Alltrax controller) so it is not plug and play. Any help would be GREATLY appreciated
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-10-2018, 06:31 PM | #2 |
Crazy Wild
Join Date: Jun 2015
Location: Carolina Lowcountry
Posts: 796
|
Re: Need help installing Alltrax XCT 48300 PDS 300
If You are talking about the square 4 pin molex plug, you will not use it.
That is to the programming port under dash. Alltrax uses a different port for programming. |
03-10-2018, 08:46 PM | #3 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Need help installing Alltrax XCT 48300 PDS 300
The Alltrax XCT is plug n' play for sure. However, you still have to get the correct controller. The XCT "PDS" is not going to work on a Precedent. The XCT-"IQ" is what you'll need for a Precedent. The XCT-PDS has an E-Z-Go connector on it and will not plug into the factory Club Car wiring.
|
03-12-2018, 06:35 PM | #4 |
Gone Wild
Join Date: Jan 2013
Location: Sun Lakes, Arizona
Posts: 610
|
Re: Need help installing Alltrax XCT 48300 PDS 300
Got it in, I just wrote what my buddy told me it was, it was the IQ is what we had.
Thanks! |
03-12-2018, 06:37 PM | #5 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Need help installing Alltrax XCT 48300 PDS 300
I helped him through email. He told me it was running 23 MPH. Glad you guys got it figured out.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Installing Alltrax XCT speed controller | Electric EZGO | |||
Alltrax SPM 48300 1 red 1 green error | Electric EZGO | |||
Installing Alltrax controller | Electric Club Car | |||
Alltrax SPM 48300 EZ 4 blink green | Electric EZGO | |||
Installing Alltrax 400 and hd solenoid | Electric EZGO |