LED light switch

Ptom · 08-26-2018, 04:56 PM

How do I install light switch with LED indicator on 2014 club car precedent
Thanks

Htownblue · 08-26-2018, 08:33 PM

Positive in and positive output from light kit harness connect accordingly on switch. Then ground the switch to a ground buss bar that connects to female Black negative near battery.

Use voltage reducer to power your light harness.

sidewalkman · 08-27-2018, 12:43 PM

I just wired my LED to 2 of my batteries, + to the 1st battery and - to the second, LED might be a bit brighter than normal but... I put a switch for it on the dash, I added a small 12V rear light into the circuit too.

yawood · 08-27-2018, 08:29 PM

Quote:

Originally Posted by sidewalkman

I just wired my LED to 2 of my batteries, + to the 1st battery and - to the second, LED might be a bit brighter than normal but... I put a switch for it on the dash, I added a small 12V rear light into the circuit too.

I'm sure you've heard this before, but that is not good for the battery pack. Depending on how much you use the 12V system, you will be pulling more power from those two batteries than the others. After a period of time the pack becomes unbalanced and it will reduce the life of the pack. So, saving the cost of a reducer (not a huge amount) in the short term will cost more in the long term when the batteries need to be replaced earlier.

sformal · 08-27-2018, 09:02 PM

Depending of the power of your lights (especially if you install or add later a lightbar), I would use a relay.

08-26-2018, 04:56 PM	#1
Ptom Not Yet Wild Join Date: Oct 2013 Posts: 21	LED light switch How do I install light switch with LED indicator on 2014 club car precedent Thanks
Ptom Not Yet Wild Join Date: Oct 2013 Posts: 21

08-26-2018, 08:33 PM	#2
Htownblue Gone Wild Join Date: May 2015 Location: Houston Posts: 903	Re: LED light switch Positive in and positive output from light kit harness connect accordingly on switch. Then ground the switch to a ground buss bar that connects to female Black negative near battery. Use voltage reducer to power your light harness.

08-27-2018, 12:43 PM	#3
sidewalkman Not Yet Wild Join Date: Jun 2017 Location: Delta BC Canada Posts: 54	Re: LED light switch I just wired my LED to 2 of my batteries, + to the 1st battery and - to the second, LED might be a bit brighter than normal but... I put a switch for it on the dash, I added a small 12V rear light into the circuit too.

08-27-2018, 09:02 PM	#5
sformal Gone Wild Join Date: Jun 2015 Location: Philippines Posts: 570	Re: LED light switch Depending of the power of your lights (especially if you install or add later a lightbar), I would use a relay.

Similar Threads
Thread	Forum
LED Light on/off switch to Mictuning LED rocker switch	Electric EZGO
Connecting LED light bar to stock light switch	Gas EZGO
Replace light switch with 3-position key switch	Electric EZGO
Light Kit-Switch	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum