|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-30-2018, 07:19 PM | #1 |
Not Yet Wild
Join Date: Feb 2016
Posts: 24
|
There is so much I don’t know
Questions from a newbie on my Culb Car DS 2002 48 V
1) got a clunking sound in the front end when in turn the wheel at slow speed, not all the time but sometimes. Could this just be in need of a front end lube ? What type of grease should I use in the gun ? 2) My key turns to the right and left. When I turn it to the right I can engage forward and reverse and the accessories work. When I turn the key to the left it does not engage forward or reverse but the accessories work. Why ? 3)I have a flip down front windshield, why would I want to flip it down ? To eat more bugs ? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-30-2018, 07:32 PM | #2 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,900
|
Re: There is so much I don’t know
1) you'll have to be a bit more specific about the clunking!
2) your keyswitch is on (right) and off (left) which tells me that your accessories (voltage reducer) is/are wired directly to the batteries. 3) the fold down windshield gives you a good breeze when it's hot out... keep your mouth closed if you don't need the extra protein! |
08-30-2018, 07:42 PM | #3 | |
Not Yet Wild
Join Date: Feb 2016
Posts: 24
|
Re: There is so much I don’t know
Quote:
Clunking like metal to metal |
|
08-30-2018, 08:16 PM | #4 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: There is so much I don’t know
Jack up the front and check the bushings in the King pins. They are likely worn giving you the clunking sound.
|
08-30-2018, 08:37 PM | #5 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: There is so much I don’t know
Someone may have installed an aftermarket key switch so they could run accessories without the cart being "On".
Does your key have teeth like a key for a lock? Most original club car keys are pretty much just a flat blade, no teeth. |
08-30-2018, 09:31 PM | #6 |
Gone Wild
Join Date: Jan 2017
Location: Queensland Australia
Posts: 1,332
|
Re: There is so much I don’t know
I agree with Lockman1 that it sounds like your accessories are wired directly to the batteries. Let me expand on that (seeing that you want to learn more):
Accessories generally run on 12V. The cart runs on 48V from the full pack of 6x8V batteries (or 4x12V for some carts). To get the 12V required by the accessories you can run a 48V-12V reducer (the best method) or wire the accessories directly to one or two batteries. This is not preferred because then more power is being drawn from those batteries than from the rest of the batteries in the pack. This makes the pack unbalanced and results in reduced life for the pack. So, not fitting a reducer saves money in the short term but eventually costs more because you need to replace an expensive battery pack sooner than you otherwise would have to. When a reducer is fitted (or the accessories wired directly to the batteries) it can be done via the on-off switch or not. If it is wired via the on-off switch then the accessories (& reducer) are off when the cart is not being used. If it is wired directly (i.e. not via the on-off switch) then the accessories (or their individual switches) have power all the time. If the accessories are wired through the switch then they are off when the key is off, even if the accessory (like the lights) has been accidentally left switched on at its individual switch. This protects the batteries by ensuring that everything is off if the key is off no matter what position the other switches are in. As to the fold down windscreen, these carts are originally meant for the golf course and this helps to keep you cool in the hot weather. It is also easier to see a small ball out of a hole than through a dirty windscreen. The speeds available in a standard cart means you wouldn't collect too many bugs anyway. |
08-30-2018, 10:15 PM | #7 |
Not Yet Wild
Join Date: Feb 2016
Posts: 24
|
Re: There is so much I don’t know
|
08-30-2018, 10:16 PM | #8 | |
Not Yet Wild
Join Date: Feb 2016
Posts: 24
|
Re: There is so much I don’t know
Quote:
Thanks |
|
08-30-2018, 10:21 PM | #9 | |
Not Yet Wild
Join Date: Feb 2016
Posts: 24
|
Re: There is so much I don’t know
Quote:
Would it be an easy switch ( yes I like puns) to put a reducer in now? |
|
08-31-2018, 01:34 AM | #10 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,214
|
Re: There is so much I don’t know
Are you sure you don't already have a reducer? Do you have 4 twelve volt batteries?
|