Lester charger relay wiring

[Roxyflash]

I’m trying to figure out if the relay on timer board is wired correctly it has a midtex 157-34S3A1 relay it’s clear in color looks like a triple pole relay I can’t find a good picture or wiring for the older timer board

[NoleFan4Ever]

I am not sure if they are present anymore, but Lester use to have drawings and some schematics on their site.

[Fairtax4me]

What model number on the charger?

[Roxyflash]

It’s a floor scrubber charger Clarke 40506A I found a picture of the timer on eBay by the looks of it mine is wired correctly it’s been charging for 12 plus hours at about 1 amp but it’s in the cold about 18 degrees here.Seeing if it’s going to shut off.It started out at 15 amps so far it’s doing its thing.

[Fairtax4me]

Looks like it’s Lester E-series just with the Clarke name on the front.
Maybe this will help: https://www.batterychargerdepot.com/...r%20Manual.pdf

[Roxyflash]

Thanks I went tru and looked at there site it’s a lestronics 2 charger what I found is it will turn on without being hooked up to batteries I’m going to test the relay or the wiring to it.Might need a timer kit

[Roxyflash]

Took the timer board out looking closer at it found a black 16 gauge wire jumping number 1 to number three terminal on relay board.

[Fairtax4me]

That sounds like a bypass to turn on the relay. Good bet it needs a timer board.

[Roxyflash]

Bought charger off eBay offered 25 plus shipping was listed untested took a chance tested it today works like a champ cut off around 45 volts .I was a charger short I have two 36 volt and 1 48 volt ds carts.Im planning on thinning the fleet so I need a charger for each cart.