11-06-2019, 08:11 PM | #1 |
Not Yet Wild
Join Date: Jun 2013
Location: Saddlebrooke, AZ
Posts: 3
|
Solenoid problems
My problem is that when i press the accelerator to move forward the solenoid clicks in and then out again. I have disconnected the large terminals and the problem still exists. solenoid contacts and loses contact. It is not the MCOR as i have two new ones and get the same results one is original style where the other is a newer style having different drive bars.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-06-2019, 08:33 PM | #2 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: Solenoid problems
Check for loose or bad connection on the activation (small) wires.
Although I also suspect it could be a faulty solenoid. |
11-06-2019, 08:38 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Solenoid problems
If you can check the voltage....be sure the solenoid is not pulling the voltage down to were the coil drops out
|
11-06-2019, 08:47 PM | #4 |
Not Yet Wild
Join Date: Jun 2013
Location: Saddlebrooke, AZ
Posts: 3
|
Re: Solenoid problems
Thanks for the quick response. I believe the solenoid may be gone bad. I will try a new one and see if it solves my problem.
|
Tags |
2003 48v club car ds iq |
|
|
Similar Threads | ||||
Thread | Forum | |||
91 EZ Go Gas Solenoid problems | Gas EZGO | |||
Solenoid problems | Electric EZGO | |||
Solenoid problems | Electric EZGO | |||
98 ez go solenoid problems | Electric EZGO | |||
solenoid problems | Electric EZGO |