Alltrax Code Help!!

Droach1531 · 09-30-2020, 08:14 PM

I have a 1994 ezgo 36v and an alltrax sr48300. The f/r switch burned up. Just replaced it and the cables. Now when I press the pedal I get 4 green flashes and it goes to solid red. The solenoid clicks.

Any ideas?

handtools · 10-01-2020, 06:19 AM

From the Alltrax SR manual,

4 Green LED Flash = EZGO ITS throttle
Solid Red Light = Controller in programming mode

Droach1531 · 10-01-2020, 07:45 AM

I saw that. Throttle is correct but how do I get it out of programming mode?

scottyb · 10-01-2020, 09:55 AM

Download the free Alltrax software and try a reset.
https://alltraxinc.com/alltrax-tool-kit/

If successful be sure to select the correct throttle type and any other special settings needed.

Droach1531 · 10-01-2020, 11:07 AM

I did a controller reset and still get 4 green flashes and solid red. In monitor mode the battery and motor voltage both read 38.1 volts and the battery and motor current both read 0.6amps with the pedal fully depressed in forward.

Any ideas on where to look/test next?

handtools · 10-01-2020, 11:48 AM

If it's stuck in programming mode and a reset didn't help I would contact Alltrax for assistance, you might have to send it to them.

scottyb · 10-01-2020, 11:55 AM

Call 541-476-3565-ext 3

09-30-2020, 08:14 PM	#1
Droach1531 Not Yet Wild Join Date: Apr 2019 Posts: 13	Alltrax Code Help!! I have a 1994 ezgo 36v and an alltrax sr48300. The f/r switch burned up. Just replaced it and the cables. Now when I press the pedal I get 4 green flashes and it goes to solid red. The solenoid clicks. Any ideas?
Droach1531 Not Yet Wild Join Date: Apr 2019 Posts: 13

10-01-2020, 06:19 AM	#2
handtools Gone Wild Join Date: Nov 2011 Location: S.E. Mi. Posts: 531	Re: Alltrax Code Help!! From the Alltrax SR manual, 4 Green LED Flash = EZGO ITS throttle Solid Red Light = Controller in programming mode

10-01-2020, 07:45 AM	#3
Droach1531 Not Yet Wild Join Date: Apr 2019 Posts: 13	Re: Alltrax Code Help!! I saw that. Throttle is correct but how do I get it out of programming mode?
Droach1531 Not Yet Wild Join Date: Apr 2019 Posts: 13

10-01-2020, 09:55 AM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: Alltrax Code Help!! Download the free Alltrax software and try a reset. https://alltraxinc.com/alltrax-tool-kit/ If successful be sure to select the correct throttle type and any other special settings needed.

10-01-2020, 11:07 AM	#5
Droach1531 Not Yet Wild Join Date: Apr 2019 Posts: 13	Re: Alltrax Code Help!! I did a controller reset and still get 4 green flashes and solid red. In monitor mode the battery and motor voltage both read 38.1 volts and the battery and motor current both read 0.6amps with the pedal fully depressed in forward. Any ideas on where to look/test next?
Droach1531 Not Yet Wild Join Date: Apr 2019 Posts: 13

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

10-01-2020, 11:48 AM	#6
handtools Gone Wild Join Date: Nov 2011 Location: S.E. Mi. Posts: 531	Re: Alltrax Code Help!! If it's stuck in programming mode and a reset didn't help I would contact Alltrax for assistance, you might have to send it to them.

10-01-2020, 11:55 AM	#7
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: Alltrax Code Help!! Call 541-476-3565-ext 3

Similar Threads
Thread	Forum
Alltrax Sr48600 Code	Electric EZGO
Alltrax XTC 500 Error Code	Electric EZGO
Alltrax AXE code 3	Electric EZGO
Alltrax code 2 red flashes?	Electric EZGO
Alltrax fault code 5	Electric EZGO