|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
10-01-2020, 07:14 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2020
Posts: 1
|
Txt PDS speed Senor( motor)
I bought a high speed magnet. I’ve removed the snap ring but I’m not able to remove the actual speed sensor. How do you guys get it out. I’ve put rust buster and tried pulling on it but it feels like I’m going to break the wire. I’m afraid of drilling into the motor that I will damage something
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-02-2020, 02:31 AM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Txt PDS speed Senor( motor)
It literally slides in & out of that hole (but not always easily). Dont go drilling anywhere, that's just more problems. Grab on the plastic "nub" molded around the wire. Maybe lightly scrape around the inside of the bore to free any burrs & corrosion. There is no secret factory trick, I swear.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Low top speed? CC Alltrax XCT500 FSIP speed motor | Extreme DC! | |||
| Loud noise and clicking at full speed on new high speed motor. | Electric EZGO | |||
| Top Speed with high speed gear and D&D Torque Motor | Electric EZGO | |||
| Does this sound like a speed senor? | Electric Club Car | |||
| PDS speed senor placement | Electric EZGO | |||
Linear Mode
