Led tail lights help

[beach cart]

I have a 2007 txt with the deluxe light kit that is sold by all the sponsors with turn signals. I purchased LED head and taillights to replace these. Head marker turn works fine it is regular bulb type. When hooking the all led taillights, they will burn and brake lights brighter but no turn signals. With the led hooked up in right rear the front reg.bulb wont flash either.

I ordered a electronic flasher and hope it works, the type is 2 blade. Doing more looking there is another type with an external ground wire, that says its for both led and reg. bulb type. If this is the type I need please tell me and can the external ground be hooked to the ground wire on the headlight indicator it has a bolt from the back that its ground is hooked too. Sorry if this is too long windeduploadfromtaptalk1408045917966.jpg

[beach cart]

Bump any ideas guys

[teecro]

I speak from motorcycles only... If your light kit came with an old style mech flasher it will likely not work with LED bulbs as they don't draw enough energy to heat up the bi-metallic element in the flasher. Switching to a new electronic flasher will usually cure this issue. Early on folks had to add a resister across the wiring so as to load and heat up the flasher to make work....

[beach cart]

Thanks hoping the led electronic flasher works, also trying to figure how this flasher would be, why an external ground wire.

[cgtech]

I think the third wire on the 550 flasher is for the indicator on the dash, or in a cart, on the signal head.

[beach cart]

Thanks cgtech