Installed lights, won't run

kogieblack · 08-15-2014, 07:09 PM

Check for busted fuse.

suffolklou · 08-16-2014, 08:46 AM

Could be unrelated to the lights and just bad timing. Have you tried pulling back on the gas pedal while it is doing the self test?

Gerlitz0915 · 08-16-2014, 11:12 AM

Called ez go support line, they said since I wired the 48volt meter to the key switch I blew the controller. Does that make any sense?

radioman · 08-16-2014, 12:00 PM

Quote:

Originally Posted by Gerlitz0915

Called ez go support line, they said since I wired the 48volt meter to the key switch I blew the controller. Does that make any sense?

Yes.

polocheck · 08-16-2014, 01:05 PM

http://www.buggiesgonewild.com/elect...tallation.html

This sounds like a similar situation, which isn't good.

radioman · 08-16-2014, 09:09 PM

The solenoid should not click until key is switched on and you press the pedal.

polocheck · 08-16-2014, 09:55 PM

Quote:

Originally Posted by radioman

The solenoid should not click until key is switched on and you press the pedal.

In an RXV the solenoid turns on when the key is turned to any position other than off. The solenoid stays on whether the accelerator is pressed or not. I have a voltage reducer with the switch wired to the solenoid and operates as long as the key is in the F, N, or R position.

radioman · 08-16-2014, 10:00 PM

Quote:

Originally Posted by polocheck

In an RXV the solenoid turns on when the key is turned to any position other than off. The solenoid stays on whether the accelerator is pressed or not. I have a voltage reducer with the switch wired to the solenoid and operates as long as the key is in the F, N, or R position.

OK.. I didn't know. That should work OK but I would not want to connect anything to the key switch..

08-15-2014, 07:09 PM	#11
kogieblack Gone Wild Join Date: Apr 2009 Location: Vegas NV Posts: 262	Re: Installed lights, won't run Check for busted fuse.

08-16-2014, 08:46 AM	#12
suffolklou Getting Wild Join Date: Aug 2012 Posts: 87	Could be unrelated to the lights and just bad timing. Have you tried pulling back on the gas pedal while it is doing the self test?
suffolklou Getting Wild Join Date: Aug 2012 Posts: 87

08-16-2014, 11:12 AM	#13
Gerlitz0915 Not Yet Wild Join Date: Jul 2014 Posts: 54	Re: Installed lights, won't run Called ez go support line, they said since I wired the 48volt meter to the key switch I blew the controller. Does that make any sense?
Gerlitz0915 Not Yet Wild Join Date: Jul 2014 Posts: 54

08-16-2014, 01:05 PM	#15
polocheck Getting Wild Join Date: May 2014 Posts: 82	Re: Installed lights, won't run http://www.buggiesgonewild.com/elect...tallation.html This sounds like a similar situation, which isn't good.
polocheck Getting Wild Join Date: May 2014 Posts: 82

08-16-2014, 09:09 PM	#16
radioman Gone Wild Join Date: Jan 2014 Location: South Georgia Posts: 1,120	Re: Installed lights, won't run The solenoid should not click until key is switched on and you press the pedal.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Installed HID lights	Electric Club Car
Led lights and volt meter installed	Electric Club Car
Got the lights installed but have other issues....	Gas Yamaha
Signal lights and brake lights installed	Gas EZGO
2006 lights installed	Electric Club Car