Alltrax axe 4845 controller

bobe2332 · 03-26-2019, 07:02 PM

Not sure about the paperclip but I will be sending more pics tomorrow with a better camara. Thanks for all your help. My daughter sent me this used cart she found on the internet and I don't want to tell her it's junk. I contacted the seller and he stated no guarantee. That was one day after he delivered it..thanks again.

Sent from my SM-T810 using Tapatalk

yurtle · 03-26-2019, 08:14 PM

Here. Movie night tonight. I'll start back tomorrow.

Brob1969 · 03-26-2019, 08:41 PM

I have the same controller on my cart and it is fine. It sounds like yurtle has you on the right road. I wouldn't discount the cart as junk just yet. They're pretty solid.

yurtle · 03-27-2019, 09:25 AM

Quote:

Originally Posted by bobe2332

Not sure about the paperclip but I will be sending more pics tomorrow with a better camara. Thanks for all your help. My daughter sent me this used cart she found on the internet and I don't want to tell her it's junk. I contacted the seller and he stated no guarantee. That was one day after he delivered it..thanks again.

Sent from my SM-T810 using Tapatalk

No fear of that. As of now, the only thing wrong is it doesn't do 1/2 speed reverse due to wiring and/or MS problems. Controller does 1/2 speed. Beeper is an unknown. Does it beep?

bobe2332 · 03-27-2019, 09:34 AM

Beeper wire cut when I got it.

Sent from my SM-T810 using Tapatalk

bobe2332 · 03-27-2019, 11:37 AM

Photos

Sent from my SM-T810 using Tapatalk

yurtle · 03-27-2019, 12:01 PM

I can't make heads or tails out of those pics. I hoped for a pic or two of each of the MSs.

The MS that's on the side appears to have the pack positive jumper, which looks red. It also appears to have an orange coming from it. The orange should only have pack positive when it's closed, and should only be closed when the FNR is in reverse. If you can verify it has pack positive even when it's not in reverse then you need to replace that microswitch.

There is a cam that rotates and has several notches that the MS levers fall into. Is it possible the spray paint or undercoating or whatever that stuff is, got into the MSs and/or cam?

yurtle · 03-27-2019, 12:06 PM

Can you confirm the MS on top has a green wire on one terminal and a green and red wire on the other? I asked for those on a previous pic. Maybe you didn't know, you click on a thumbnail and you see a viewable size of the attached pic.

The black spade connector goes to the reverse beeper.

bobe2332 · 03-27-2019, 12:49 PM

Green comes from plus on battery to top of spade. Red wire connected to same spade. Blue wire connected to the other spade. On the lower micro-switch, bottom spade is connected to the orange wire. Top spade of the lower micro-switch is not connected to anything. However, there is a black wire coming from the harness that has a connector that is not connected, just hanging. I am talking to you on a tablet and it does not have a paperclip.

Sent from my SM-G935V using Tapatalk

bobe2332 · 03-27-2019, 12:55 PM

There green wires from both harnesses are spliced together.

Sent from my SM-T810 using Tapatalk

03-26-2019, 07:02 PM	#11
bobe2332 Not Yet Wild Join Date: Nov 2018 Posts: 26	Re: Alltrax axe 4845 controller Not sure about the paperclip but I will be sending more pics tomorrow with a better camara. Thanks for all your help. My daughter sent me this used cart she found on the internet and I don't want to tell her it's junk. I contacted the seller and he stated no guarantee. That was one day after he delivered it..thanks again. Sent from my SM-T810 using Tapatalk
bobe2332 Not Yet Wild Join Date: Nov 2018 Posts: 26

03-26-2019, 08:41 PM	#13
Brob1969 Gone Wild Join Date: Feb 2019 Location: North Florida Posts: 271	Re: Alltrax axe 4845 controller I have the same controller on my cart and it is fine. It sounds like yurtle has you on the right road. I wouldn't discount the cart as junk just yet. They're pretty solid.

03-27-2019, 09:34 AM	#15
bobe2332 Not Yet Wild Join Date: Nov 2018 Posts: 26	Re: Alltrax axe 4845 controller Beeper wire cut when I got it. Sent from my SM-T810 using Tapatalk
bobe2332 Not Yet Wild Join Date: Nov 2018 Posts: 26

03-27-2019, 11:37 AM	#16
bobe2332 Not Yet Wild Join Date: Nov 2018 Posts: 26	Re: Alltrax axe 4845 controller Photos Sent from my SM-T810 using Tapatalk
bobe2332 Not Yet Wild Join Date: Nov 2018 Posts: 26

03-27-2019, 12:01 PM	#17
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: Alltrax axe 4845 controller I can't make heads or tails out of those pics. I hoped for a pic or two of each of the MSs. The MS that's on the side appears to have the pack positive jumper, which looks red. It also appears to have an orange coming from it. The orange should only have pack positive when it's closed, and should only be closed when the FNR is in reverse. If you can verify it has pack positive even when it's not in reverse then you need to replace that microswitch. There is a cam that rotates and has several notches that the MS levers fall into. Is it possible the spray paint or undercoating or whatever that stuff is, got into the MSs and/or cam?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-27-2019, 12:06 PM	#18
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: Alltrax axe 4845 controller Can you confirm the MS on top has a green wire on one terminal and a green and red wire on the other? I asked for those on a previous pic. Maybe you didn't know, you click on a thumbnail and you see a viewable size of the attached pic. The black spade connector goes to the reverse beeper.

03-27-2019, 12:49 PM	#19
bobe2332 Not Yet Wild Join Date: Nov 2018 Posts: 26	Re: Alltrax axe 4845 controller Green comes from plus on battery to top of spade. Red wire connected to same spade. Blue wire connected to the other spade. On the lower micro-switch, bottom spade is connected to the orange wire. Top spade of the lower micro-switch is not connected to anything. However, there is a black wire coming from the harness that has a connector that is not connected, just hanging. I am talking to you on a tablet and it does not have a paperclip. Sent from my SM-G935V using Tapatalk
bobe2332 Not Yet Wild Join Date: Nov 2018 Posts: 26

03-27-2019, 12:55 PM	#20
bobe2332 Not Yet Wild Join Date: Nov 2018 Posts: 26	Re: Alltrax axe 4845 controller There green wires from both harnesses are spliced together. Sent from my SM-T810 using Tapatalk
bobe2332 Not Yet Wild Join Date: Nov 2018 Posts: 26

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
alltrax controller	Electric Club Car
Alltrax controller	Electric Club Car
4845 ALTRAX 400 AXE Prog. Controller	Golf Carts and Parts
Will AXE 4845 burn my stock motor?	Electric EZGO
36v cc installed a alltrax 4845 - results	Electric Club Car