|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-27-2019, 12:56 PM | #21 | |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Alltrax axe 4845 controller
Quote:
Second MS appears to have a red wire from MS2 connected to the top terminal and orange to the other. Is that not true? You are on a website, not a tablet. The website has a paperclip, and I already sent you a picture of it. I also sent you another pic of my best guess, which I had hoped you'd comment on. I was wrong about which wire is the jumper. It is red and connects one MS to the other, does it not? Black spade connector goes to beeper. Beeper should also have another wire connected. Where does that go? Should go same place as orange. |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-27-2019, 12:59 PM | #22 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,176
|
Re: Alltrax axe 4845 controller
May be time to get back to the basics
|
03-27-2019, 01:00 PM | #23 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Alltrax axe 4845 controller
Look at image below. It is a thumbnail. You have to click on it. Have I identified TWO wires on MS4? You said MS4 has just one?
|
03-27-2019, 01:02 PM | #24 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Alltrax axe 4845 controller
|
03-27-2019, 01:40 PM | #25 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,176
|
Re: Alltrax axe 4845 controller
My bad.
|
03-27-2019, 01:45 PM | #26 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Alltrax axe 4845 controller
The good news is it works. Apparently MS4 is stuck closed and backup beeper is disconnected. All he needs to do is replace MS4 and find someone who can read a diagram, if he wants/needs 1/2 speed reverse and a backup beeper.
|
03-27-2019, 01:57 PM | #27 |
Not Yet Wild
Join Date: Nov 2018
Posts: 26
|
Re: Alltrax axe 4845 controller
Thanks for all your help is greatly appreciated.
Sent from my SM-T810 using Tapatalk |
03-27-2019, 02:06 PM | #28 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Alltrax axe 4845 controller
Sorry for being impatient, but I sent you several thumbnails and it seemed like you were ignoring them. If you could answer all questions in the last several posts, we can be certain it's MS4 stuck closed, and not spray-paint/under-coating, or whatever in the FNR cam.
|
03-27-2019, 02:24 PM | #29 |
Not Yet Wild
Join Date: Nov 2018
Posts: 26
|
Re: Alltrax axe 4845 controller
Ok. Wires are attached exactly to ms4 as in the thumbnail you sent.
Sent from my SM-T810 using Tapatalk |
03-27-2019, 02:33 PM | #30 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Alltrax axe 4845 controller
Then it really sounds like MS4 is stuck closed - on. You can get one at most golf cart shops or from a site sponsor. Make sure you call it MS4 for a series cart.
However before you get a new one, look closely at its lever and see if it appears to move when the FNR is in neutral then in reverse. While you wait for a new one, you can connect the black wire with a spade connector to the beeper. Does it beep? If not, look on the other spade connector of the beeper and see where the wire goes. |
|
|
Similar Threads | ||||
Thread | Forum | |||
alltrax controller | Electric Club Car | |||
Alltrax controller | Electric Club Car | |||
4845 ALTRAX 400 AXE Prog. Controller | Golf Carts and Parts | |||
Will AXE 4845 burn my stock motor? | Electric EZGO | |||
36v cc installed a alltrax 4845 - results | Electric Club Car |