|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-30-2019, 01:59 PM | #1 |
Not Yet Wild
Join Date: Feb 2019
Posts: 23
|
What do I need to reverse a lift kit?
I bought an RXV with a lift kit on it, not much, maybe 3-5 inches? But the front end steering and wheel caster is horribly jacked up for street cruising (think previously owner used off-road a lot based on the type of tire on there). I have already performed the front end alignment via the steering rack toe adjustments and it helped a little.
But the steering is super sensitive, unpredictable, and pulls bad. I'm new to this a little, so what pieces would I need to go back to stock ride height? Just the spindles? Or do I have any other options? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-30-2019, 02:34 PM | #2 |
Gone Wild
Join Date: Feb 2019
Location: North Florida
Posts: 271
|
Re: What do I need to reverse a lift kit?
What kind of lift was installed?
Some pictures would be helpful. Usually you can tame these things with a mild lift. |
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO TXT 2007 vibrates in reverse after upgraded forward/reverse switch | Electric EZGO | |||
1981 Harley 3 wheel D model reverse issue/won't reverse | Gas Harley Davidson | |||
No reverse. HD forward reverse switch needed? | Electric Club Car | |||
Forward/Reverse not working right after installing 4" lift on my G2 | Gas Yamaha | |||
Reverse alarm stuck - motor won't run forward or reverse | Electric EZGO |