|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-04-2019, 06:00 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2019
Posts: 4
|
EZ Go RXZ won’t move
Just got a new to me RXZ. New batteries producing 51.4 volts. Took it off charge couple days ago and it don’t want to move. Put in Tow, rolled it, back to run and it worked. Turned off / on multiple times (as much as 12 hour pause between cycles) not a problem. Put it on charge last night - now it won’t move again. Tried switching to Tow, rolling it but that’s not helping this time. Any ideas?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-04-2019, 06:31 PM
|
#2 |
|
Gone Wild
 Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,233
|
Re: EZ Go RXZ won’t move
Try pulling back on the gas pedal and see if it goes. What year is the cart?
|
|
|
|
|
04-04-2019, 09:57 PM
|
#3 |
|
Not Yet Wild
Join Date: Apr 2019
Posts: 4
|
Re: EZ Go RXZ won’t move
She still no go. Where do I look for year model?
|
|
|
|
|
04-04-2019, 10:30 PM
|
#4 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: EZ Go RXZ won’t move
Serial nuber tag can be found just above drivers front wheel, or on the steering column. The sticker up front has a date code as well.
|
|
|
|
|
04-04-2019, 10:32 PM
|
#5 |
|
Not Yet Wild
Join Date: Mar 2019
Posts: 27
|
Re: EZ Go RXZ won’t move
Might be in interlock.
What is your voltage coming out of the blue wire. |
|
|
|
|
04-05-2019, 12:15 PM
|
#6 |
|
Not Yet Wild
Join Date: Apr 2019
Posts: 4
|
Re: EZ Go RXZ won’t move
It’s date code is 1109.
Which blue wire am I checking? |
|
|
|
|
04-05-2019, 04:18 PM
|
#7 |
|
Not Yet Wild
Join Date: Oct 2016
Location: Summerville, SC
Posts: 11
|
Re: EZ Go RXZ won’t move
I just had this problem, ended buying a new motor brake. Brake would not unlock, pulled it off and was all rusty in it. Under your run tow switch there are some bypass connectors to see if the brake will unlock.
|
|
|
|
|
04-05-2019, 05:13 PM
|
#8 |
|
Not Yet Wild
Join Date: Mar 2019
Posts: 27
|
Re: EZ Go RXZ won’t move
The blue wire coming out of the receptical typically plugged into a orange wire.
If it has +24volts typically the car will run. Put positive on your blue And your negative of your multimeter on main negative.  Sent from my SM-G965U using Tapatalk |
|
|
|
|
04-06-2019, 08:31 AM
|
#9 |
|
Not Yet Wild
Join Date: Apr 2019
Posts: 4
|
Re: EZ Go RXZ won’t move
50.5 volts on blue wire with charger NOT plugged in. Receptical bad?
|
|
|
|
|
04-06-2019, 08:49 AM
|
#10 |
|
Not Yet Wild
Join Date: Mar 2019
Posts: 27
|
Re: EZ Go RXZ won’t move
Receptical is good.
The voltage tells the controller it's not charging and should drop to 0-2v when charging. But that's not your problem today. Your controller is a Danaher. Which to alot of people dont understand them. The best effort I can give you bud is follow power according to this diagram that the almighty Bob gave. Follow Yellow from SOL -> Fuse -> KeySwitch -> Output Red of keyswitch -> Pin 1 of controller. Then the plug thing under the cup holder. Make sure that stupid thing has a firm connection and no green or pink or what ever color corrosion.  Sent from my SM-G965U using Tapatalk |
|
|
|
|
| Tags |
| charging issue, rxv start sequence |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 99 TXT won't move | Electric EZGO | |||
| Ez-Go will not move | Electric EZGO | |||
| Another G29 that doesn't move!! | Electric Yamaha | |||
| 1996 Series DS 48V won't move on ground, wheels barely move on jacks | Electric Club Car | |||
| 36V E-Z-Go will not move | Electric Club Car | |||
Linear Mode
