36v EZGO “bogs” down

brettp2004 · 05-20-2019, 10:25 AM

Quote:

Originally Posted by yurtle

That's not what the recommendation on the .jpg I gave you as link to says.

Maybe I’m reading it wrong? It says 1-3 beeps is speed sensor.. check and replace if needed. .

brettp2004 · 05-20-2019, 10:36 AM

Everything I read says to remove the snap ring from the speed sensor. I don’t see a snap ring. Does it just pull out of the motor?

R.Boyd · 05-20-2019, 11:09 AM

Looks like your snap ring is missing. Also, you can see marks where it looks like someone pried it out with a screwdriver or something. maybe it isn't seated property because of that and that's the problem. I think it should come it now that the snap ring is missing. Be sure the magnet is good under there.

brettp2004 · 05-20-2019, 01:36 PM

Well.... after I messed with the sensor, it worked just fine. So I’m guessing the sensor just backed out a little too far. I’ll have to get a clip to hold in. Thanks for all the help. Learned a lot and was able to fix it for free.

yurtle · 05-20-2019, 04:26 PM

Great. The notes said "check" before it said "replace".

05-20-2019, 11:09 AM	#23
R.Boyd Getting Wild Join Date: Sep 2018 Posts: 96	Re: 36v EZGO “bogs” down Looks like your snap ring is missing. Also, you can see marks where it looks like someone pried it out with a screwdriver or something. maybe it isn't seated property because of that and that's the problem. I think it should come it now that the snap ring is missing. Be sure the magnet is good under there.
R.Boyd Getting Wild Join Date: Sep 2018 Posts: 96

05-20-2019, 01:36 PM	#24
brettp2004 Not Yet Wild Join Date: May 2019 Posts: 11	Re: 36v EZGO “bogs” down Well.... after I messed with the sensor, it worked just fine. So I’m guessing the sensor just backed out a little too far. I’ll have to get a clip to hold in. Thanks for all the help. Learned a lot and was able to fix it for free.
brettp2004 Not Yet Wild Join Date: May 2019 Posts: 11

05-20-2019, 04:26 PM	#25
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: 36v EZGO “bogs” down Great. The notes said "check" before it said "replace".

Similar Threads
Thread	Forum
Bogs down when accelerating	Gas Yamaha
WTB Rzgo RXV Resistor Control Module for Danaher Controllers	Golf Carts and Parts
EZ Go Robin 2 Cyl 96?? Bogs down...	Gas EZGO
g-16 bogs down at 10 mph and up?	Gas Yamaha
2001 CC bogs down	Gas Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum