lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-28-2019, 02:29 PM   #11
Canuck2400
Getting Wild
E-Z-GO
 
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
Default Re: Controller Programming

Thanks Johnny, think I know what I did wrong—- I’ll recheck when this thunder storm blows over —- it’s a doozy
Canuck2400 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-28-2019, 02:41 PM   #12
Canuck2400
Getting Wild
E-Z-GO
 
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
Default Re: Controller Programming

Thanks for your help—— I guess it’s all for nothing until I can figure out how I lost all power to the controller—- there is power to the solenoid, but not sure which wire to check on the controller.
Canuck2400 is offline   Reply With Quote
Old 06-28-2019, 03:30 PM   #13
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: Controller Programming

Check for battery voltage on J1 Pin-4. (Alltrax calls it C1 on the attached schematic.)

This voltage comes from the reed switch, or reed switch bypass.
Attached Images
File Type: jpg XCT-PDS with regen diode -2.jpg (233.3 KB, 0 views)
JohnnieB is offline   Reply With Quote
Old 06-28-2019, 04:55 PM   #14
Canuck2400
Getting Wild
E-Z-GO
 
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
Default Re: Controller Programming

Thanks Johnny, I’ll check that
Canuck2400 is offline   Reply With Quote
Old 06-29-2019, 10:23 AM   #15
Canuck2400
Getting Wild
E-Z-GO
 
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
Default Re: Controller Programming

I checked the voltage C1 pin 4 and it is getting full pack voltage
Canuck2400 is offline   Reply With Quote
Old 06-29-2019, 12:57 PM   #16
Canuck2400
Getting Wild
E-Z-GO
 
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
Default Re: Controller Programming

I checked the voltage on the switch wires —- with the key on
In forward— Orange wire .5v
Grey .4
Green .4

In neutral. Orange. 1.9
Grey. .5
Green. Jumps all over

In reverse. Orange. 1.3
Grey. .3
Green. Jumps all over

Thanks for any help you might offer
Canuck2400 is offline   Reply With Quote
Old 06-29-2019, 02:41 PM   #17
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: Controller Programming

Attached is a drawing showing how the voltage gets into the controller and out to the switches and solenoid coil. It is for a stock PDS controller (Curtis 1206MX), but the voltage paths for an Alltrax XCT controller is the same except the voltage to the keyswitch does not go through the F/R switch first like it does in the stock PDS controller.

You've got battery voltage on C1 Pin-4, so the next place to look is C3 Pin-3, through the Run/Tow switch and then C3 Pin-4.

Get the battery voltage on the grey wire going to the F/R switch and one of the problems is solved.
Attached Images
File Type: jpg Voltage paths through PDS controller.jpg (138.9 KB, 0 views)
JohnnieB is offline   Reply With Quote
Old 06-29-2019, 03:05 PM   #18
Canuck2400
Getting Wild
E-Z-GO
 
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
Default Re: Controller Programming

Thanks Johnnie ——I checked wires pin 3 (red) is pack voltage and pin 4 (orange) just jumps around
Canuck2400 is offline   Reply With Quote
Old 06-29-2019, 03:13 PM   #19
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: Controller Programming

Sounds like a bad Run/Tow switch. Clip lead 3 to 4 and see if it runs.

Then we can go after the other issues, if they still exist.
JohnnieB is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Motor vs controller & controller programming Electric EZGO
Help programming 500 xct iq controller Electric Club Car
1266 controller programming Electric golf carts
Controller Programming? Electric EZGO
Programming alltrax controller Electric EZGO


All times are GMT -5. The time now is 07:31 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.