|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-15-2019, 06:52 AM | #11 |
Gone Wild
Join Date: Oct 2008
Location: East Texas
Posts: 586
|
Re: Am I good? 2015 Refurb RXV
That looks like a 3" spindle lift to me. All the lifts look taller on the RXV's.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-15-2019, 10:23 AM | #12 |
Gone Wild
Join Date: Feb 2018
Posts: 185
|
Re: Am I good? 2015 Refurb RXV
Get a pic of the inner part of the front wheel at the axle and the suspension from underneath at the rear wheel. In the rear there likely is a big aluminum block between the axle and the suspension leaves. From the pics it does look like a 3" spindle lift as stated above. The new pics will confirm.
I took my 3" lift off as I think it rides rougher due to the geometry of the spindles as they align to the suspension. My cart can go 28 mph and I did not care for the higher center of gravity at that speed, especially on a cart that is not designed to go very fast. |
07-15-2019, 11:06 AM | #13 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,179
|
Re: Am I good? 2015 Refurb RXV
kg, from a fellow kg, You can look on the spindle and maybe find a part number to look up to find out what lift that is. Also just a blind stab is to measure from the center of the new axle shaft to the center of where the spindle pivots. It is just a spindle lift so no magic wand.. Where in SC are you ?
|
07-15-2019, 07:49 PM | #14 |
Not Yet Wild
Join Date: Jul 2019
Posts: 14
|
Re: Am I good? 2015 Refurb RXV
Thanks for the input. I'll get that pic and post it.
Appreciate the knowledge. I will be spending some time in here getting more informed. Sent from my SM-N950U using Tapatalk |
07-15-2019, 07:58 PM | #15 |
Not Yet Wild
Join Date: Jul 2019
Posts: 14
|
Re: Am I good? 2015 Refurb RXV
Not sure if this helps. But thanks.
Sent from my SM-N950U using Tapatalk |
07-16-2019, 01:05 PM | #16 |
Gone Wild
Join Date: Aug 2012
Location: Houma, Louisiana
Posts: 950
|
Re: Am I good? 2015 Refurb RXV
Looks like the 3" spindle lift to me. Installed one on my last RXV that I upgraded to the 350 amp controller and 23" tires.
|
07-16-2019, 01:17 PM | #17 |
Not Yet Wild
Join Date: Jul 2019
Posts: 14
|
Re: Am I good? 2015 Refurb RXV
Advice on the controller upgrade? I saw one for $400 that seems like a refurb, or $1600 for what I assume is a new one?
Do you recommend the upgrade? Sent from my SM-N950U using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
Melex 212 Refurb | Melex | |||
Carryall 6 refurb begins | Electric Club Car | |||
First cart refurb | Members Rides | |||
Cleaning/refurb a motor | Electric Club Car | |||
1990 CC - Refurb and Restart | Gas Club Car |