Someone to program freedom mode on a rxv

kgsc · 07-20-2018, 01:33 PM

I have the 4401 handheld and have my laptop working with OEM or 4401 level working but not developer which is what you need to go further.. I don't have a cart here so it is a little tough to troubleshoot. Its funny but the hex programming on the adapter shows up different when connected to a controller than when not..

Bigben2251987 · 07-20-2018, 02:25 PM

Dang guys how fast can they go I thought 19.5 was the fastest

kgsc · 07-20-2018, 02:32 PM

Again I am still working on it but wheelies and 25 plus is obtainable.

Check your PMs

Notocer · 07-20-2018, 07:16 PM

mine does 33mph some go 40. Sure makes a difference. It's all in the programing.

Buggieman18 · 07-21-2018, 09:54 PM

It can go pretty fast. Mine goes 27+, but keep in mind that a white-knuckle ride is in no way a relaxing one. These carts are not designed for nor inherently stable enough to go such speeds.

bryanwood74 · 12-10-2018, 10:08 PM

Anyone with dev access, if so will you pm me details so I can get this, I’ve got OEM access with 1309 usb cable and Curtis Programming station 4.6.7

Sent from my iPad using Tapatalk

taylorscottb · 08-14-2019, 11:08 PM

I'm near Augusta as well. Curious whether you were able to find someone to program it locally - I just bought a 2018 with a curtis fleet controller on board, with 22" tires I'm getting 16.5 mph. Thought about pulling the controller and shipping it off to someone, but the advice on this board suggests that in-cart programming is preferred. For the programming bandits out there, I'd be happy to compensate someone who can crack this thing and get it into the 20s without requiring a Navitas swap (already tried that and got 26, but acceleration was terrible and the motor temp error was going off as soon as I started it up.)

usgicollector · 08-14-2019, 11:37 PM

If you have a 2018 RXV with 22" tires you really should be looking at getting a Curtis 350amp controller. Speeding up that 235amp controller is no problem. You can send it to Bob Boyce or get a local dealer to put it in Freedom mode for you.

kgsc · 08-15-2019, 06:52 AM

With 22” tires and 16mph it is probably set in mode 2 maybe 3 at about 12 mph. I have the abilities to program it but the 22” tires worry me. The controller can be turned up but if taken to full potential I don’t think it would be happy long. Where are you located near Augusta?

taylorscottb · 08-15-2019, 07:17 AM

I'm in Aiken as well. And I apologize... the shop misprinted the tire size. They're 20" tires. Went out and measured this morning.

07-20-2018, 01:33 PM	#11
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,188	Re: Someone to program freedom mode on a rxv I have the 4401 handheld and have my laptop working with OEM or 4401 level working but not developer which is what you need to go further.. I don't have a cart here so it is a little tough to troubleshoot. Its funny but the hex programming on the adapter shows up different when connected to a controller than when not..

07-20-2018, 02:25 PM	#12
Bigben2251987 Not Yet Wild Join Date: Jul 2018 Posts: 17	Re: Someone to program freedom mode on a rxv Dang guys how fast can they go I thought 19.5 was the fastest
Bigben2251987 Not Yet Wild Join Date: Jul 2018 Posts: 17

07-20-2018, 02:32 PM	#13
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,188	Re: Someone to program freedom mode on a rxv Again I am still working on it but wheelies and 25 plus is obtainable. Check your PMs

07-20-2018, 07:16 PM	#14
Notocer Not Yet Wild Join Date: Sep 2017 Location: Ocala Fl Posts: 55	Re: Someone to program freedom mode on a rxv mine does 33mph some go 40. Sure makes a difference. It's all in the programing.

07-21-2018, 09:54 PM	#15
Buggieman18 Gone Wild Join Date: Feb 2018 Posts: 185	Re: Someone to program freedom mode on a rxv It can go pretty fast. Mine goes 27+, but keep in mind that a white-knuckle ride is in no way a relaxing one. These carts are not designed for nor inherently stable enough to go such speeds.
Buggieman18 Gone Wild Join Date: Feb 2018 Posts: 185

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-10-2018, 10:08 PM	#16
bryanwood74 Getting Wild Join Date: Sep 2018 Location: AL Posts: 85	Re: Someone to program freedom mode on a rxv Anyone with dev access, if so will you pm me details so I can get this, I’ve got OEM access with 1309 usb cable and Curtis Programming station 4.6.7 Sent from my iPad using Tapatalk

08-14-2019, 11:08 PM	#17
taylorscottb Not Yet Wild Join Date: Aug 2019 Location: Aiken, SC Posts: 4	Re: Someone to program freedom mode on a rxv I'm near Augusta as well. Curious whether you were able to find someone to program it locally - I just bought a 2018 with a curtis fleet controller on board, with 22" tires I'm getting 16.5 mph. Thought about pulling the controller and shipping it off to someone, but the advice on this board suggests that in-cart programming is preferred. For the programming bandits out there, I'd be happy to compensate someone who can crack this thing and get it into the 20s without requiring a Navitas swap (already tried that and got 26, but acceleration was terrible and the motor temp error was going off as soon as I started it up.)

08-14-2019, 11:37 PM	#18
usgicollector Gone Wild Join Date: Mar 2014 Location: NE Indiana & SW Florida Posts: 3,238	Re: Someone to program freedom mode on a rxv If you have a 2018 RXV with 22" tires you really should be looking at getting a Curtis 350amp controller. Speeding up that 235amp controller is no problem. You can send it to Bob Boyce or get a local dealer to put it in Freedom mode for you.

08-15-2019, 06:52 AM	#19
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,188	Re: Someone to program freedom mode on a rxv With 22” tires and 16mph it is probably set in mode 2 maybe 3 at about 12 mph. I have the abilities to program it but the 22” tires worry me. The controller can be turned up but if taken to full potential I don’t think it would be happy long. Where are you located near Augusta?

08-15-2019, 07:17 AM	#20
taylorscottb Not Yet Wild Join Date: Aug 2019 Location: Aiken, SC Posts: 4	Re: Someone to program freedom mode on a rxv I'm in Aiken as well. And I apologize... the shop misprinted the tire size. They're 20" tires. Went out and measured this morning.

Similar Threads
Thread	Forum
48v passkey to unlock freedom mode	Electric EZGO
Freedom mode	Electric EZGO
Confirming Freedom Mode	Electric EZGO
Ezgo Freedom mode pass key	Golf Carts and Parts
Changing Trucourse Technology options to Freedom mode	Electric EZGO